muneeb_nawaz

I have already reflashed by Bios with the A13 but the problem is still there so there is no problem in the bios i think - - - Updated - - - i troubleshooted my PC, removed all the rams and inserted the working one in to slot 1 2 3 4, slot 1 and 3 booted up the PC but slot 2 and 4 gave 4 beeps on startup. any suggestions?

deleted...

OPS sorry its 1058 :S my bad so yeh now what?

Suggestions would be accepted

I have an Alienware m17x R4. Yesterday one of my rams got busted and the memory slots 2 and 4 don't work anymore. i have tried installing a good mem stick in each one to check but 1 and 3 work but 2 and 4 don't. Please post any solutions if u know

I have already done that so at 1.05 V i get 1100/2480 Its stable and at 1.025 1071/2200 which one to pick

Unstable....well after 2 hours of intense load it only went up to 79. and during benchmarks it ran a cool 76 with clock now at 1100/2475....

I am using a portable fan as a cooling pad..temps don't go above 60 LMAO

well i play max payne 3 and metro last light and those games free at 1006/2450.. right now they don't and with the 1100/2455 it was give me around about 40-50 FPS - - - Updated - - - the 50 MHZ is on the GPU clock..it does give me considerable performance because right now GPU clock won't budge from 1058 - - - Updated - - - I hope so. thanks for the help - - - Updated - - - 10 minutes of Metro 2033 and temp back up to 88-89.. the laptop is elevated for ventilation but still.... high temps ..-,-

thing is the extra 10mv give me arounf 50mhz because the current clock won't go about 1058..so the voltrage is bottlenecking it...the extra 10mv can be like an experiment to see temps and if it works well and good if it doesn't back to 1025. but i just need someone to tweak the voltage. this can benefit the 680m users as well, to unlock their card to its full potential while remaining at suitable temps

true dat. i want to ask about about the memory clock, i can't seem to go higher than 2500 it just freezes and boom driver crash. what is this about...-,-

The temperature at this overclock stays round about 76-78C and my notebook is alienware m17x R4. i lose around 3-6 FPS my 3d mark vantage score for the GPU only is 31205. if someone can tweak a little with the voltage and make it around 1.035 it should be sufficient for 1100/2455 overclock at suitable temps. but the GPU clock doesn't go higher than 1058 on msi after OSD

I have over clocked my 680m with the 1.05 volt bios. i set my GPu clock to 1100MHZ and my memory clock to 2450..Its stable no crashes + glitches..But i am hitting temps of 87-89C. is it ok or should i worry about. if i should worry gimme a solution. thanks

Ops yeh i meant 1.05...

Is it safe to run GTX 680m 2GB at 1.5 volts..I know over clocking is risky but is it ok to update to this bios?

Hey. I am new to the flashing and over clocking community. I have an ALienware m17x R4 with Gtx 680m just looking to over clock this bad boy

Well basically GTX 690 are two 680s on 1 chip. But the 670 Sli has almost the same performance as the 690 but it has a disadvantage. it requires two cards, more heat more money... where u can buy one 690 right now maybe buy aother one later to make them SLis.....Will run every game on ultra.. Hope this helps