iTzZent

You need the 51x Bios to run GTX7**M Cards. After flashing the Bios you need also modified Nvidia Drivers, because you have the Clevo Version of the GTX770M. Driver: LaptopVideo2Go: NVIDIA & Laptop News Bios: http://www36.zippyshare.com/v/93475751/file.html

no chance to run another kepler Card with the MS-1761.

it´s based on the MSI MS-1762 Barebone.

The Dell/Alienware GTX770M will not work in a MSI Barebone. When you will flash the MSI vBIOS than you brick the Card. Only the Clevo and the MSI Version can be work in MSI Barebones.

it was a defect. he has not overclocked.

i have no other information from this card, because the card has say "byebye" after 1 week his dealer who took the card back and credited the money. Now he runs a MSI GTX980M in the MS-16F2 (Medion Erazer X6813). Here is the complete thread from german the Owner from our german MSI Forum: Medion Erazer X6813 (MSI Barebone MS-16F2) - neue Grafikkarte? - Notebooks und Barebone Systeme - MSI Forum

MS-16F2 + i7-2630QM + MSI GTX970M 3GB 3DMark11 : The Card comes from the GT72 Upgradekit and don´t need any driver modifcation. The Test was finished with the Stock 150W PSU! MS-1761 + i7-2670QM + Clevo GTX970M 6GB 3DMark11: MS-1763 + i7-4900MQ + Clevo GTX970M 6GB 3DMark11: with +135Mhz: You can also read this Thread: http://forum.notebookreview.com/threads/the-official-msi-gt60-70-970m-980m-upgrade-thread.765058/ there are many user with old MSI Barebones + GTX970M/980M.

The GTX770M is the only Kepler Card that will work with the MS-1761, no other Kepler Card works... maybe the Clevo Version of the GTX670MX can be work...

i hope that you have also changed the heatsink for the GTX770, because the Fermi GTX670M heatsink is not compatible with the Kepler GTX770M. When you have a MS-16F3 or a MS-1762 Barebone than you need the 51x Bios to fit the GTX7**M series. From where you get the GTX770M ? Because when the cards comes from another MSI device, than you don´t need any modified drivers.

and the most importent thing... Nvidia Optimus is supported ! For the MS-1762 you need also a new Powersensorplatine + both HDD Boards.

2GB Version of the GTX580M ? Than try to flash the MSI vBIOS: VGA Bios Collection: MSI GTX 580M 2048 MB | techPowerUp after finishing flash procedure you must reboot and than you must use the modified driver from laptopvideo2go.

MSI GTX 970M 6GB MXM Upgrade Kit for MSI GT72 Notebook at Memory Express or read this Thread: http://forum.notebookreview.com/threads/the-official-msi-gt60-70-970m-980m-upgrade-thread.765058/

yes, works great. but more than 1006Mhz Corefrequence is not possible without raise up the voltage.

Hi, can you buy GT72 Upgrade Kit, the card works perfectly in the GT70, and without modified driver! You only have to remove the X-bracket carefully (e.g. with a hairdryer). For cooling, you can use your current heatsink, this only needs to be slightly modified, see here: http://forum.notebookreview.com/threads/the-official-msi-gt60-70-970m-980m-upgrade-thread. 765058 /

You need 3 things: 1. the 51x Bios Zippyshare.com 2. a new Heatsink: New MSI MEDION Heat Sink nVidia GTX780 GTX770 E31-0406580-Y31 | eBay or New MSI MEDION Heat Sink nVidia GTX670MX GTX675MX GTX680M E31-0406162-Y31 | eBay 3. the proper Card: MSI GTX770 M Nvidia GTX 770M GPU 3GB MXM 3.0 N14E-GS-A1 | eBay because this is the MSI Version of the Card, you don´t new modified driver ! alternatively you can directly buy the GT72 upgrade kit, this costs about 500Euro with a 970M. Since you have the X-bracket removed from the back side of the card and just buy a heat pipe because only (Kepler versions of the above are compatible after you have modified it) From where you are ?

@Bugii i wrote "Kepler GPU", not "fast GPU".

MS-16F2 != MS-16F3 The MS-16F3 runs normaly with all Kepler GPU, the MS-16F2 only with the GTX770M MSI or Clevo Version.

You need an other heatsink for kepler cards. New MSI MEDION Heat Sink nVidia GTX780 GTX770 E31-0406580-Y31 | eBay with cpu bridge New MSI MEDION Heat Sink nVidia GTX670MX GTX675MX GTX680M E31-0406162-Y31 | eBay without cpu bridge both are 100% compatible with all kepler cards. the first one with cpu bridge has a better thermalmanagment. the seller offers also an original MSI GTX770M MSI GTX770 M Nvidia GTX 770M GPU 3GB MXM 3.0 N14E-GS-A1 | eBay i recommend using this backplate for all kepler cards, for ca. 5°C less: MSI Medion Backplate for nVidia GTX,570M, 670M 675M , 680M; E31-10803350-Y31 | eBay currently I use a MSI GTX870M + with CPU Heatsink Bridge in my MS-16F3, before that I had a MSI GTX770M + without CPU Bridge Heatsink (works now in a MS-1762). @hans123 the Dell GTX680M with svl7´s Mod Bios has worked in your MS-16F3 without any problems ? Comes the Bios from here? : http://forum.techinferno.com/general-notebook-discussions/1847-nvidia-kepler-vbios-mods-overclocking-editions-modified-clocks-voltage-tweaks.html or has svl7 this created specialy for your system ?

The GTX770M works perfect, at least MSI and Clevo version. In the Dell version, I'm not so sure that, because Dell Cards will make very frequent problems in MSI barebones.

You need also an other Heatsink. Why you don´t buy the MSI Upgrade Kit ? $815 incl heatsink http://www.hidevolution.com/parts/nvidia-gtx-980m-8gb-upgrade-kit-for-msi-gt72.html

Many thx for your Support ! Driver Reinstall has fix this Problem

i´ve flash your Mod vBIOS. Only GPU-Z shows 1006Mhz as default clock... the last screen is with the new gpu-z version and nvinspector with +135mhz

hmm i can only raise up to 1076Mhz from 941Mhz default Clock. i´ve tested with nvinspector and msi afterburner.

@Klem many thx ! you can´t disable the "135Mhz Lock" ?

@karasahin I have not tested because there is not "MSI" stands directly and the MSI 870M are the only ones with 3GB. Did not really pleasurable to damage my card But if you say that the VBIOS works with your 870M, then everything is OK In which device you run the card? Can you maybe upload a GPU-Z Screenshoot ?