Hi,
Ultrabay has to be updated, since this mod is covering gpu bios unlock as well, and system bios doesn't containing that.
Probably off topic here...
svl7!
Is there a way, to further unlock vga bios? Talking about allowing on the fly software modification of TDP limits of cards, with like Afterburner.
The reason behind this is the following:
Kepler voltage is automatic, probably based on a voltage table, maybe linked to ASIC quality too.
If you set 1058 mhz, it will run at 1058, with for example 1.056V.
If you set it to +135 which is 1189 it will run at that speed, with 1.056V.
But, if you set it to throttle back, temp or TDP or usage limit, it will throttle voltage too, and will run stable at 1058mhz with 1.006V.
Temp limit is kinda hard to choose, to maintain a stable clock speed, but TDP limit could be.
Or a direct way to edit that voltage table, or be able to offset to negative values.
As seen on attached screens, ultrabay bios can be set to negative offset, but this offset is too low, still higher voltage, idle, load, whatever.
Integrated card can just be offseted to positive values.
Did a quick factory/modded ultraby bios compare in kepler bios editor, attached it via picture, some features still locked.
Unfortunately Svet's bios editor from MSI HQ is currently not supporting these cards.
With this, maybe we can shave a few degree from gpu temperature.
Thanks!