Jump to content
epicepe

Y400 external GPU using Ultrabay

Recommended Posts

I have a Y400, a 3D printer and a plan.

I want to get a desktop GPU roughly compatible with the 650m -- GTX 650? -- and wire it up to my GPU-less Ultrabay. Having looked at the teardown pictures, it looks like something sort of kinda similar to a normal PCI port. Is this at all possible?

Share this post


Link to post
Share on other sites

probably not, even if you could get the electrical stuff all worked out there is the problem of the bios not booting with unrecognized cards. You would also have to hack the bios and even then I highly doubt it would work because the laptop probably couldn't supply the required 75w of power over the bus that a desktop card would need. There are a few old hacks out there were people use some connectors on laptops to do something similar but it was a huge amount of work and the bandwidth was very limited.

Share this post


Link to post
Share on other sites

You would need to make your own connector from ultrabay to pci express 8x (or 16x), but so far i've seen no succes on egpu area with lenovo y series.

Sent from my iPhone using Tapatalk

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By Sparkhunter
      Hi there guys,
       
      I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
       
      I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
       

       
      The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
       
      If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.
       
      Thanks.
       
    • By Blocker35
      Hi guys, bit of a rookie to the whole EGPU scene. Currently I have:
       
      - MacBook Pro 2015 13inch (3.1GHz Core i7 16GB RAM)
      - Razer X Core 
      - Apple TB3 to TB2 Adapter
      -  TB2 Cable (Cable Matters)
      - 23inch AOC External Monitor
       
      I am wonder about what graphics card to get to run X-Plane11 with high graphic settings?
      I have purgewrangler set up and ready to use with an AMD graphics card, but am also open to the idea of an Nvidia graphics card.
      Any advice appreciated. I did not buy a Windows PC as I need a Mac for various other things and wanted an all-in-one laptop.
    • By SnipeKing17
      The GPU works, The PSU works, The system works. [individually they all do work]
       
      The system works perfectly fine without the WLAN card.
       
      When i put the system to sleep and hotswap the mPCIe riser and WLAN press something on the keyboard.. Restarts.
      Will shutdown in roughly 27 seconds for those 27 seconds it works just fine like how it normally would on external monitor.
       
      When i shut it down and plug the riser and switch it on, same story. 27 seconds.
       
      I don't even see a error. I get to login screen directly. I used DDU already.
       
      I timed it. no matter what i do if i use the eGPU, External monitor it restarts instead of pause-play. I have 27 seconds.
       
      Need help!
    • By captcavy
      Hello everyone,, I need your expertise, I have a m17 r4, (2012) unlocked A15 bios thanks to Klem, it has a Gtx 675m in it now, 
      I would like to know the best GPU to upgrade to without losing a lot of the factory functions of the alienware laptop, like being able to use both VGA functions such as intel 4000, and the factory bios for the cooling of the GPU, I don't want to solely rely on the nvidia
      As a full dedicated GPU, let me know what VGA card to get and what vbios to use, I will gladly donate beer to you for your help, or point me to a member on this forum who can help me,
      Thanks, Shelby,  Aka captcavy
    • By Kel
      I got the exp gdc beast 8.5 got all the connections right... laptop boots up... fans turn on the gpu.... device manager detects gtx 1060 with a “ ! “ in a yellow triangle. Now what to do.... i tried to do the bios mod.... but realised that i have 3.07 version. 
      Questions-
      1 is there any way to get this done without the mod?? 
      2 if mod is the only way... kindly help me with step by step instruction in laymans terms... i m not a techy... so i might not understand technical terms.... altho i am interested... but learning yet. Please help. 
×

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.