Jump to content
EwinRacing Flash Series Gaming Chairs
Sign in to follow this  
Arodion

Nvm

Recommended Posts

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By TheChamp
      Hello Techies!
       
      New to the forums and I own a Alienware M17X R3 that has never had anything done to it and finally after 9 years the HDD crapped out, i purchased a Samsung SSD that I will be receiving next thursday so just getting a low down on what the proper procedure is. I currently have Bios A03 which will not give me SATA III speeds either from what I have read and will need A08? Will the Dell Bios update work for me or should i be trying to go with A12 unlocked? Can i do the update off windows as soon as do a fresh install on the new SSD? Or do I have to make a bootable usb? Sorry im not dumb with computers but not as smart as I want to be haha Thanks in advance for every ones help!
       
      I also want to upgrade my GPU at some point which current is an Nvidia 460M, what is the best/cost effective upgrade I should do and do I have to have a certain Bios to run that as well?
    • By moaker
      I dont know if this is the right forum to post this,  (but i need 5 posts for downloading a  vbios)
       
      so my questions are these, thank you in advance for reading
       
      I have bought a laptop with a half melted 880M GPU Im assuming the person did not keep an eye on temps,
      so i went and replaced the card, it runs fine, (alright) but still, I remember modding my VBIOS for my 680 GTX back in the day, and it was fine, exceptionally faster, 
      and im looking for that 60 fps LOCK, like i got on my 680 after modding the vbios, 
       
      I did increase the voltage on the card to 1.212 I believe, from 1.114 ,
       
      anyway I considering modding the cooling system as well for this laptop, because it definitely lacks cooling 
      My plan is to put another laptop fan (where the HDD1 bay is in the Alienware 17) bcause I removed that hdd it was constantly at 57c which is bad
      even think it suffered some damage as speeds on it for specific games and tasks are pretty long, and it stays at 100% some times, which is weird, but it still works, so im using it.lol
       
      , but in the meantime, I turned the laptop upside down, plugged in the HDMI cable, and now im blasting a ROOM fan at it, which is definitely helping with temps
      before I would try to throttle the gpu speed at 77C, or 73C depending on the game or even saying screw it, I dont want throttling, and putting the throttle point to 83C,
      I use SPEEDFAN , and it helps keep the laptop relativly cool, except when the gpu is under full load,  putting my hand on it is ridiculously hot, so, with the fan on it, its not going above 70,
      and taking a LONG time to get up there, 
      i am playing metro last light at around 60C at 60+ fps, where as before my temps were shooting upto 80 and it would hit the throttle point, so  seeing as how this is a 120 HZ laptop, I rather not push it, since the card is not capable (and if it is, the cooling sure isnt)
       
      the plan is to put the fan inside the HDD1 bay, and POSSIBLY  daisey chain it to either A) the cpu fan header, or  B ) the gpu fan hjeader, 
       
      QUESTION:
      not sure which "rails" the power for these comes from, would it be able to handle another fan???
      it seems like a legit idea, seeing as how the rear of the heatsink has NO heat dissipation at all. which is the part that melted offcausing the old  card to die in the first place.
      basically the thermal pads look like they gunked the card and it was unfixable, I have a post to it on the Alienware Forum, which i could link later,
       
      is it a good idea, and will the VBIOS WORK with my 880M (DELL) from a clevo, (now in an alienware) im assuming they are compatible, as long as they are dell.
      also would I be able to get a Y adapter for the inside of a laptop fan, that would be AMAZING, i know they sell them for Desktops.
      Thanks
       
       
    • By ShineGlizzy
      Hey guys whats going on? I have an M17X R3, been running the 780M perfectly fine for about 7 months now. I've updated the driver once before, but it seems I'm having problems with all of the latest releases. Whats happening is when I download the latest driver, I run the setup so the 398.36 folder gets saved on my computer. Well thats what is NOT happening. Every time I run it, I see the folder pop up, but once the Nvidia downloader fails (as it should), the 398.36 folder disappears! I cant figure out how to make it stay there permanent! I've disabled driver signing and everything. Any suggestions?
    • By TheShortStackTech
      I recently got a 2010 27" iMac for free! Some further research concluded that the MXM slot in the iMac has been proven to work with a GTX 880m, including Mac OS! I used to play with a 7970 ghz edition, but ended up selling it for some more projects. I've been lagging along on a 5870 2gb and thought that with my switch to the free iMac, I might as well update my gpu. Heres the problem I was faced with: the 880m is a little underpowered on stock clocks. So, after even more research I discovered that the 980m was around the same as a 7970 performance wise. I ended up grabbing a deal on an 880m for only 160$, but I did want to share my findings with you guys.
       
      *WARNING* ONLY 2009, 2010, AND 2011 IMACS HAVE THE MXM SLOT!!!! IF YOU ARE USING A 2012+ YOU CANNOT UPGRADE YOUR GPU
       
      So the 980m used to work all the way up to mac os sierra. It's now high sierra, but the fix is still pretty simple.
       
      What you will need:
      -thermal pads
      -copper ram heatsinks/ one of the specialized backplates that cools MXM memory modules.
      -Your graphics card
      -YOU NEED an imac 2011 gpu heatsink
      -GOOD thermal paste (Preferably liquid metal if youre comfortable with that)
      -IMAC 2010 power supply
      *As far as i know the power supply's between these 3 imac's are interchangeable, but the largest one is the 2010 variant, at the 310 watts, and the others are much lower.
      *Just from tdp we know that the 980m is 115w and the cpu's on these guys are most commonly 95w, thats allready 200 with out hdd, all the other components etc.
      -nvidia web drivers
       
      READ THE FOLLOWING DIRECTIONS CAREFULLY
       
      Step 1: You must have all your mac os/ windows partitions set up with bootcamp, and MAKE SURE it boots into Mac OS and wont boot into anything else when you start it up AFTER the upgrade.
      *Remember nvidia web drivers must be installed before you upgrae
      Step 2: dremel/ cnc/ remove a couple parts of the VRM section of the imac 2011 heatsink, (You want your card IN HAND so you are able to make sure it fits correctly.
      step 3: Assemble the gpu assembly
      step 4: Re assemble the imac, with the new gpu.
      *This is where is gets slightly harder*
      step 5: You want to reset your iMac's System Management Controller, otherwise known as SMC.
      *DO NOT FLASH NVRAM OR PRAM, or you will have to redo the whole process, after you put your old gpu in to fix all the bootcamp problems and such
      *You can do this by plugging the power cord into your imac, waiting 30 seconds and NOT turning it on, unplug your power cord, wait 30 seconds, then plug it back in. Wait another 30 seconds, then turn it on. (But not before reading the following to be prepared:)
      step 6: You need to force Mac OS to work with an unsupported card. this is a pretty simple process if you are comfortable with terminal.
      * I couldn't have found this without this page: 
      https://www.ifixit.com/Story/18646/Successful_iMac_Upgrade_to_GTX_880M
      "
      To make a non-apple provided Nvidia graphics card work in macOS Sierra you need to do the following…
      Start the computer in safe mode by holding shift.
      Get your BoardID by running this command in terminal
      echo "<result>$(ioreg -rd1 -c IOPlatformExpertDevice | awk -F'["|"]' '/board-id/{print $4}')</result>"
      Open the AppleGraphicsControl Kext using this command
      sudo nano /System/Library/Extensions/AppleGraphicsControl.kext/Contents/PlugIns/AppleGraphicsDevicePolicy.kext/Contents/Info.plist
      Use the arrow keys to go down until you see <key>ConfigMap</key> followed by a bunch of keys and strings.
      LOOK FOR YOUR BOARD ID…
      IF IT IS LISTED: Change the string to <string>none</string>
      IF IT IS NOT LISTED: Add it in the same format as the ones listed.
      Save the file by pressing Ctrl+O, then enter.
      Exit by pressing Ctrl+X
      Rebuild the kernel cache using the following two commands:
      sudo kextcache -system-prelinked-kernel
      AND
      sudo kextcache -system-caches
      Have Fun!
       
      Theoretically this should work, and I would love for somebody to try as I got an 880m instead. Just keep in mind this is all from research and has not been proven to work. Be sure to research this subject before you try it.
    • By b-tzu
      Hello
       
      My M18XR2 was working on Windows 10 with a 880M.
      Last week, I reinstalled my system, and I couldn't get nvidia driver working...
      I took the last installed modified driver, and even downloaded latest version, modified it again, nothing to do, I have same error : nvidia installation failed. 
      I only install the graphic driver too, it fail. The screen goes black, then light again, and it fail...
      Do someone have an idea how to fix this probleme ? 
      Thank you 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.