Hi there guys,
I've been looking into getting a new GPU for my laptop (4-lane PCI-e) and enclosure (HP Omen Enclosure) but I cannot decided between the RX 5700 XT and the RTX 2070 (non SUPER).
I did some price to performance calculations (higher is better) with some of the best prices I can currently get in the UK.
The RX 5700 XT does perform better and is cheaper than the RTX 2070 (Although the 2070 does come with 2 games) but my main concern is drivers and from what I've heard NVIDIA cards work a lot better with eGPUs than AMD.
If anyone has experience using both red & green or if anyone else has any other input i'd love to hear your experiences and input.
Hi guys, bit of a rookie to the whole EGPU scene. Currently I have:
- MacBook Pro 2015 13inch (3.1GHz Core i7 16GB RAM)
- Razer X Core
- Apple TB3 to TB2 Adapter
- TB2 Cable (Cable Matters)
- 23inch AOC External Monitor
I am wonder about what graphics card to get to run X-Plane11 with high graphic settings?
I have purgewrangler set up and ready to use with an AMD graphics card, but am also open to the idea of an Nvidia graphics card.
Any advice appreciated. I did not buy a Windows PC as I need a Mac for various other things and wanted an all-in-one laptop.
To anyone wondering about eGPUs on M6700s, its not too complicated, there is just a process that must be done on boot every time:
You need to have the eGPU connected and powered on before booting the laptop, once you get to the Intel RAID screen disconnect the eGPU and wait for windows to load up, once windows is loaded reconnect the eGPU and you *should* be able to use it and be able to hot-swap it (though you should disable it in windows before unplugging it) installing the normal AMD drivers worked fine for me, though the original release of Adrenaline 19.1 blue screened the first time.
I usually run with 3 1080p monitors attached to the 480, replaced my old i5 desktop with this laptop due to the convenience of storing everything on one machine, the laptop has a 256gb SSD and 2x 750GB hdds in raid 0, there is a 2TB WD black attached to the eSATA on the dock.
eGPU and external HDD are powered by a 500W evga desktop ATX psu, the EXP GDC's ATX power adapter was clunky and broke while trying to use it, so I just plugged in a CPU 4 pin cable upside down to power it, not worried about it because the bulk of power is coming from the 8 pin on the GPU anyway.
Привет. Помогите, мне грустно.
Существует clevo p150em, недавно обновленный с 7970 до 8970 м (от 150 см)
Bios, R.2.0 / 1.02.17EC v3b / 1.02.11EC.
Когда он был установлен 7970 м, в BIOS на линии gpu это было 7970 м. После установки 8970m, NVIDIA пишет вместо 8970m.
Драйверы на 8970m не установлены, либо синий экран, либо ноутбук замерзает. Windows 10 1713.
Я пробовал разные версии драйверов, все равно. Что вы посоветуете?
8970m vbios VER015.041.000.000.044964 BR44964.009 it s DELL?
ps. when I bought 7970m for a place of 670m. At 7970m there was also a problem with the drivers, but I somehow skipped it.