Jump to content
EwinRacing Flash Series Gaming Chairs
wmjnottriell

(E)GPU is running a low voltage (EVGA 750 ti SC)

Recommended Posts

I have a

I'm Running Windows 10 pro on.....

2011 2.4GHz i7 quadcore Mac Mini with 16GB ram

Akitio Thunder2 pcie chassis with a EVGA gtx 750 ti SC (2gb) running over thunderbolt 1

400 watt continuous power EVGA psu with a barrel plug spliced onto an 8pin connector (4 yellow 12v) (4 black grounds) with paperclip trick applied

 

Ok so I have a few different hardware monitoring apps and they all say that my 750 ti is running at  .962 volts. That seems to low to me. I even successfully flashed the bios by following this tutorial

http://cryptomining-blog.com/1014-how-to-increase-the-geforce-gtx-750-ti-power-target-limit/

 

I've played around with Msi Afterburner and PrecisionX 16 and nothing helps. I feel like the voltage being so low is the main reason why my gpu is very unpredictable and jumps frame rates like crazy. it will be running for example tom clancy's ranbow 6 siege on everything high @1920 getting over 60fps and then i'll start it up again and it'll be 8fps or something. I just don't know what to do.

Any help would be appreciated,

Thanks,

Bill

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By blaz_evic
      Hello

      I upgraded my old laptop with i7-3632qm and its working fine, temps are ok but he wont boost. Lenovo g500s could be bought with i7-3632qm and it had same cooling as was 2020m so i dont think cooling is problem. Can i bios unlock? I cant acces advanced settings in bios. i need help

      thanks
    • By felipe001998
      Hello fellow technicians, I have acer e1-531 that after installing an i5 (from factory it comes with a celeron b960) started to shut down after 30 minutes, searching the internet I found that it would be necessary to make a modification in the bios to accept this processor, could someone help me with this case?
    • By TetroM
      Hello everyone,
      My new laptop Thunderobot Zero 11800H_RTX3060 have a locked bios. I tried CPU undervolt via ThrottleStop utility and Intel XTU utility, but they didn't work. I heard I need to unlock advanced settings in BIOS to unlock these utilities. So, I need help to unlock hidden advanced settings. Thanks!
    • By laxus
      i want to ask two favours and a question from this community ..
       
      1.) Can someone mod my 940 mx to increase the target temperature and allow higher overclocking than 135hzband voltage control
       
      2.) Allowing my i5 7200U to be undervolted to reduce overall heat 
       
      The question : I repasted my gpu and cpu cleaned it thoroughly, made sure twice everything is connected properly, use a cooling pad and yet the upper portion of my chasis above f1-f12 keys is so hot that i can roast peanuts on it. 
       
      (if i left out any info or missed something please reply i would really love to have a page that has everything for people who have this laptop specifically for light gaming.)
    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad L440.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.
      Important!
      For creating bios backup and to flash bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2322090.m570.l1313&_nkw=USB+Programmer+Ch341&_sacat=0
       
      https://www.amazon.com/s?k=ch341a&ref=nb_sb_noss_2
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/programming-EEPROM-Programmer-EZP2010-RT809H/dp/B075CGH1X1/ref=sr_1_18?dchild=1&keywords=SOIC8+clip&qid=1631766855&s=electronics&sr=1-18
       
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.