TakoTaco Posted July 10, 2020 Share Posted July 10, 2020 I changed my primary display to SG and switched integrated graphics device to enable (I think this broke it...). Ever since I switched those two settings my laptop just wont show bios nor boot. Is there a way to get into the bios? Or flash it? I have the 120hz 3d monitor Quote Link to comment Share on other sites More sharing options...
TakoTaco Posted July 12, 2020 Author Share Posted July 12, 2020 Update: just fixed it by removing the CMOS battery and holding the power button for 25-30 seconds and putting the CMOS battery back in. By doing this it reseted the bios settings. Quote Link to comment Share on other sites More sharing options...
Belka Posted September 28, 2020 Share Posted September 28, 2020 In my case i had to remove the battery and replace it, then remove the discrete card (7970m) and switch it on to boot. Went to BIOS and switched it to PEG, after which i shut it down again and placed back the discrete card, and boot. Hope this helps anyone out there stuck with a black screen on boot! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.