Automayted Posted April 21, 2020 Share Posted April 21, 2020 My newly flashed T450 does not boot, and shows no signs of life other than three flashes of the power LED when an AC adapter is attached. The flashed bios was verified to match. I've removed all power, RAM, and disconnected the CMOS battery, but even after sitting for hours, there is no change. I reloaded my factory bios, but same symptoms continue. Can anyone help? Here's my original BIOS dump: https://www.sendspace.com/file/edkjql Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted April 21, 2020 Bios Modder Share Posted April 21, 2020 37 minutes ago, Automayted said: The flashed bios was verified to match. What the bios you was flashed? Where you get it? Quote Link to comment Share on other sites More sharing options...
Automayted Posted April 21, 2020 Author Share Posted April 21, 2020 2 minutes ago, Klem said: What the bios you was flashed? Where you get it? Thank you for taking time to reply! I created the modded BIOS by following this guide: Here's the modded BIOS: https://www.sendspace.com/file/2lau6m Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted April 21, 2020 Bios Modder Share Posted April 21, 2020 If your modified bios doesn't work, then just flash your unmodified original stock bios dump. Quote Link to comment Share on other sites More sharing options...
Automayted Posted April 21, 2020 Author Share Posted April 21, 2020 Thanks for the feedback. I've already done that. I've erased the chip, confirmed it is blank, flash my original dump, then read it back and the files match. Still no boot. Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted April 21, 2020 Bios Modder Share Posted April 21, 2020 2 minutes ago, Automayted said: Thanks for the feedback. I've already done that. I've erased the chip, confirmed it is blank, flash my original dump, then read it back and the files match. Still no boot. In this case this mean your original stock bios dump is not correct. Quote Link to comment Share on other sites More sharing options...
Automayted Posted April 21, 2020 Author Share Posted April 21, 2020 Here's my original BIOS dump: https://www.sendspace.com/file/edkjql Read it twice and confirmed both copies matched. I was also able to open it and modified the GUIDs. Quote Link to comment Share on other sites More sharing options...
Bios Modder Klem Posted April 21, 2020 Bios Modder Share Posted April 21, 2020 2 minutes ago, Automayted said: Here's my original BIOS dump: https://www.sendspace.com/file/edkjql Read it twice and confirmed both copies matched. I was also able to open it and modified the GUIDs. If you sure your original stock bios dump is correct, but laptop can't start with it, I think may be SOIC8 clip could hurt some lines, pins os small elements around the bios chip. Quote Link to comment Share on other sites More sharing options...
Automayted Posted April 21, 2020 Author Share Posted April 21, 2020 Good idea, but not the case here. I've worked with PIC and SOIC programmers for many years on much smaller (tighter tolerances) equipment. A new (used with warranty) motherboard for this aging machine is less than $30. Just ordered one. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.