Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

Hi everyone,

I hope I'm not going to write off-topic;

I own an Acer Predator 15 (G951) notebook, and it never gave me problems before; I've never used the integrated audio jack port because I usually listen to music and other stuff through Bluetooth headphones, but few weeks ago I noticed that putting a jack connector in the jack port only deactivates the sound from the pc speakers, but the headphones don't appear in the "devices" section, and the sound coming out from the headphones is really faint and distorted (only if the system slider of sound is at the maximum level and the sound should be very noisy, when the level is lower I don't hear anything at all). Also, when I put a jack in the microphone jack port of the pc I hear the classic sounds of the jack which touches the pin connectors inside the port, but it doesn't happen with the headphones port. I tried almost everything: I changed a lot of headphones, both phone headphones with a single jack and pc headsets with two jacks (for the headphones and for the microphone) but every time it's the same. I installed and reinstalled a lot of different versions of the audio drivers, both from Acer and the productor (Realtek), and nothing changes, I also tried with Ubuntu and it's the same. What could be the cause, and can the problem be solved without any technic intervention? Anyway the warranty for my pc is still valid, but the assistance should be the very last resource (I should do a backup of everything and format and so on). And, the last question, I flashed a custom VBIOS some time ago, does this compromise the warranty? Should I really reflash the original VBIOS or it's not so likely they're going to check on this?

 

Thank you all for your attention!

Share this post


Link to post
Share on other sites

I would bet in a damaged audio jack, if the laptop as warranty make use of it.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By mclarke2355
      Hello,
       
      I want to share the modded Bios I created for the Acer Aspire E5-572G notebook.
      The official bios 1.09 was used as a base.
      I'm offering three flavours: Microcode 01, Microcode 07 and Microcode 21.
      Microcode 21 is the latest available microcode, this is the Bios you want to use unless you want the special properties of the other microcodes.
      Microcode 07 is the latest microcode that allows using the full turbo clock speed on all cores (using single core turbo with all cores).
      Microcode 01 is the one you should take if you want to try this. I wasn't able to get it to work on mine (i5 4210m, HM86), but your mileage may vary.
      In case you want to always use an older microcode, I'm offering a script for windows that'll keep the OS from using a newer microcode (compatible with Windows Vista to Windows 10). Frequency and other things can be set up with ThrottleStop (use the latest version).
      I've also included an overclocking enabled ME firmware that should (hopefully) allow overclocking on the HM87 equipped notebooks.
      There are two flavours of this notebook available: Ones that use the HM87 chipset and others that use the HM86 chipset. Overclocking is only possible with HM87 as HM86 isn't capable of overclocking (tested it myself).
      Additionally I offer a collection of Bios, EC, ME and FD files of this device, in case anyone wants to experiment with these for a bit (EC Modding, etc.).
      I will update this bios in case there are newer parts available.
       
      Any feedback is welcome!
       

      Features:
      -Advanced Bios Options unlocked (Advanced, Power tabs and additional options in the existing tabs)
      -Nvidia 840M/940M VBioses replaced with adapted 940MX VBios with unlocked TDP Limit, unlocked Boost Table and some OC (1306,5MHz GPU/1070MHz Memory - with general usability in mind) + all voltage sliders unlocked
      -Intel Management Engine: Updated to 9.1.37.1002 + All Locks Unlocked + Overclocking Enabled For HM87 Notebooks + PAVP (Protected Audio/Video Path) Enabled
      -Flash Descriptor unlocked
      -Microcode updated to version 21 (respectively downgraded to 07 and 01)
      -Intel GOP Driver updated to 5.5.1033
      -Intel VGA Bios updated to 1042
      -Intel RST OROMs updated to 15.1.0.2545
      -Realtek Lan OROMs updated to 2.037/2.64
      -Applied a few useful BIOS patches by CodeRush (Unlock CPU Power Management Register (useful for Hackintosh Users)/Disable BIOS Lock/Disable SMI Lock)
       

      Flash procedure:
      1. Copy the BIOS file to an empty and with FAT16/32 formatted usb stick.
      2. Unplug the AC adapter.
      3. Remove the battery of the notebook - you can unlock the battery on the backside.
      4. Plug in the USB flash disk.
      5. Press and hold <Fn> and <Esc>, and then plug in the AC adapter while still holding <Fn> and <Esc>.
      6. Press the Power button. You can now stop holding <Fn> and <Esc>.
      7. The BIOS flash should now begin, the fans will spin up at max speed and the power led should blink. It should take between one to two minutes.
      8. After everything is done, you can reinsert the battery and go to the BIOS (F2). There you may want to change some settings (the BIOS flash erases all previously chosen settings).
       

      Recommended Bios settings:
       
      Main:
      F12 Boot Menu ---> Enabled
      D2D Recovery ---> Disabled
       
      Advanced:
      Boot Configuration: Numlock ---> On
      Thermal Configuration: Cpu Thermal Configuration: Bi-Directional PROCHOT# ---> Disabled
      Chipset Configuration: RTC Lock ---> Disabled
      Chipset Configuration: IFR Update ---> Disabled
      Chipset Configuration: BIOS Lock ---> Disabled
      ACPI Table/Features Control: TCO WatchDog Support ---> Enabled
      ACPI Table/Features Control: WatchDog ACPI Table ---> Enabled
      ACPI Table/Features Control: ACPI Memory Debug ---> Disabled
      ACPI Table/Features Control: PEP Graphics ---> Disabled
      Extended ICC: Use WatchDog Timer For ICC ---> Enabled
      Extended ICC: ICC Locks after EOP ---> All Unlocked
       
      Security:
      User Access Level ---> Full
       
      Power:
      Wake on LAN ---> Disabled
      Advanced CPU Control: xAPIC Mode ---> Enabled
      Advanced CPU Control: Package C-State Demotion ---> Enabled
      Advanced CPU Control: Package C-State Un-Demotion ---> Enabled
      Advanced CPU Control: ACPI 5.0 CPPC Support ---> Enabled
      Advanced CPU Control: ACPI 5.0 CPPC Platform SCI ---> Enabled
      Advanced CPU Control: Package Power Limit MSR Lock ---> Disabled
      Advanced CPU Control: Long Term Power Limit Override ---> Enabled
      Advanced CPU Control: Long Term Time Window ---> 128
       

      Module names (for replacement/update):
      GOP Driver: 7755CA7B-CA8F-43C5-889B-E1F59A93D575_256.ROM
      Intel RST: 382F560D-17A9-4887-BD9C-EB439C1CC482_1654.ROM and 501737AB-9D1A-4856-86D3-7F1287FA5A55_1781.ROM
      Intel VGA Bios: 8DFAE5D4-B50E-4C10-96E6-F2C266CACBB6_1743.ROM
      Nvidia 840M VBios: D336DBCB-33C1-4D15-A06F-C3FF405C6A68_1749.ROM
      Nvidia 940M VBios: C09F4207-D557-47D0-A4B5-1E4B6459E519_1761.ROM
      Realtek LAN: 0A33D14A-7B60-4C58-9194-DED0812F9B2B_1767.ROM and E8991F69-D813-4116-A2C2-61E304ECBD72_1533.ROM
      Intel Microcode (integrated in file): PADDING_2702.ROM
      Management Engine: Integrated in BIOS image, HEX Editor needed for replacement
       

      Credits: 
                    -Donovan6000 for his very helpful guides and insights on Insyde bios modding
                    -Andy P whose PhoenixTool I used to replace the modules
                    -Plutomaniac for providing the used Intel ME firmware and the Intel ME System Tools to properly configure it for this notebook
                    -Ultrax5 from TechInferno for providing his OC enabled ME firmware for 8-series systems which I used as a reference to unlock the feature for this notebook
                    -SoniX for his Intel VGA Bios update guide and the OROM, Microcode and Intel VGA Bios database he maintains
                    -Pacman for sharing the latest Intel RST 15.1.0.2545 OROMs
                    -CodeRush for providing the included BIOS patches
                    -WerePug from overclock.net for providing the way to unlock the Nvidia VBIOS voltage sliders for editing in Maxwell II BIOS Tweaker
                    -The author of the Maxwell II BIOS Tweaker which I used for editing the Nvidia VBioses
                    -All the other people who shared the used OROMs/Microcodes/Firmwares/Useful Information etc.
       

      Changelog:
                         -13.09.16: 1.09a - Initial release
                         -03.10.16: 1.09b:
                                                      Unlocked a few more options that I missed before - everything that can be unlocked should be available now
                                                      Overclocking enabled ME is now included by default (no disadvantages for HM86 notebooks)
                                                      Applied a few useful BIOS patches by CodeRush (Unlock CPU Power Management Register (useful for Hackintosh Users)/Disable BIOS Lock/Disable SMI Lock)
                         -22.10.16: 1.09c:
                                                      Changed Nvidia GPU idle voltage from 0,94V to a more correct value of 0,76V - thanks to Maison1 from win-raid.com for bringing this matter to my attention
                                                      Unlocked all sliders in the Nvidia VBIOSes for editing with Maxwell II BIOS Tweaker - thanks to WerePug from overclock.net for posting the way to do this
       

      Files:
      Acer Aspire E5-572G - BIOS 1.09c - Microcode 01
      Acer Aspire E5-572G - BIOS 1.09c - Microcode 07
      Acer Aspire E5-572G - BIOS 1.09c - Microcode 21

      DeleteMicrocode Script for Windows
      Acer Aspire E5-572G BIOS-ME-EC-FD Collection
       
    • By Qvixot
      Hello everyone! First of all sorry if this isn't the correct forum to post this.
      I bought a laptop few days ago. The laptop is Sager P150EM.
      Cpu:i7 3610qm 
      Gpu: amd hd 7970m
      Ram: 8gb
      Os: windows 8.1 pro
      So my problem is that everytime i install the amd driver after the intel driver my laptop freezes or gets a bsod or something that stops it from working. Any help would be appreciated. I saw somewhere something about vbios does this matter anywhere?
    • By pippocarlot
      Hello everyone! I am looking for an answer to a problem I cannot find a solution to ... I purchased an Amd wx 4150 MXM GPU module su e bay to upgrade my HP 8570W Mobile Workstation which is currently equipped with a Fire Pro M4000. Once the new GPU has been installed, the PC screen no longer turns on but works only with external monitors connected via the docking station. The same happens once the drivers are updated! If I put the old card back on, the integrated monitor starts working again ... How can I fix it?
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.