Jump to content
EwinRacing Flash Series Gaming Chairs

2015 15" MBP M370x + [email protected] (AKiTiO Thunder2) + Win10 [MattGarlandUK]

Recommended Posts



Macbook Pro Retina 15” Mid 2015 

AMD Radeon R9 M370X 2048 MB

2.8 GHz i7, 16GB RAM


Windows 10 64bit ( bootcamp )

OSX Sierra



AKiTiO Thunder2


Graphics card:

EVGA NVIDIA GeForce GTX 1060 6 GB GDDR5 Memory PCI Express 3 Graphics Card


Power supply:

EVGA 100-W1-0500-KR - 500W 80 Plus Power Supply (100-W1-0500-KR)



Molex to barrel adapter to connect PSU to GPU and enclosure

GPU powered by the PSU directly

HDMI cable to connect GPU to monitor

Thunderbolt cable to connect Thunder2 to Macbook

PSU powered on using the 'paper clip technique'



Dell U2715H 27-Inch Widescreen IPS LED Monitor


Info and guides:




Power on and connect the GPU, check that the Nvidia is showing up in the device manager

Install Nvidia drivers

Disable discrete AMD GPU in the device manager and shut down

Boot back up into Windows10 and BOOM, Windows10 should now be using the GPU.


I can reliably get the eGPU to work every time and have experienced NO CRASHES!  I still play games using the AMD when I'm not at my desk, which just requires re-enabling the AMD.  Sometimes switching the AMD on and off can cause the device manager to hang, but restarting Windows 10 sorts this out so I've not had any problems using the system both ways.


Games Performance:

Doom - 1440p max settings - 60pfs ( WOW!!! )

Deus Ex Mankind Divided - 1440p max settings - 30-45 fps

Just Cause 3 - 1440p max settings - 30-45 fps

Star Wars Battlefront - 1440p max settings - 30-45 fps

Overwatch - 1440p max settings - 60fps


Getting Windows10 to select the eGPU as the primary display device:

As far as I can tell, all that is required to get the GPU to power the external display is to disable the discrete graphics chip (AMD R9 M370X) via the device manager in Windows10.  

In my experience, provided the eGPU is connected, disabling the AMD R9 will automatically cause the OS to switch to the eGPU.  Although a couple of times when I've done this without restarting, the AMD has switched itself back on!

Provided the eGPU is connected and powered on, and the AMD is disabled, booting into Windows 10 will automatically select the eGPU and you're away!  





Edited by MattGarlandUK

Share this post

Link to post
Share on other sites

Hey, I'm gepsannt how you manage under Win10. I use the same hardware including the EVGA GPU + AKiTiO2 combination with another power supply. From the housing I cut nothing.


The 1060 is recognized with me under Win10 but unfortunately I get it not to start (on an external TV / monitor) although I can install Nvidia drivers.

I hope you come soon with updates)

Edited by Himmellaeufer

Share this post

Link to post
Share on other sites

Hey there.  I think all you need to do is disable your discrete graphics chip ( the AMD ) via the device manager.

Share this post

Link to post
Share on other sites

Hi, can help me T-T


Today, I received every component I bought from eBay and tried to set up my eGPU. I intended to power the Akitio and graphic card using the Dell DA-2. However, I didn't realize the barrel plug was not compatible and I pushed it so hard that the central part of the connector broke as the photo showing. Is there another way to power my Akitio?


Edited by 1366921

Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

    • By Hax
      I have tried to update nvidia drivers of my notebook ge72vr6rf apache pro. The only drivers that works are the ones provided by the msi. The problem is that they haven't updated those since 2016 and I can't play newer games. 
      Some say you need to mod your 1060 drivers, which I have no idea how to some says you need to update the flags in ini files. So please help me
      Thanks for your time.
    • By aBug
      Hello Everyone!
      I have problem with VBIOS/EEPROM(?) after installing of a GTX1060 N17E-G1-A1 GPU NVIDIA Graphics Chipset (old one has temp. damages). 
      I  modified new 416  and old 391 nvmii.inf file and try to install drivers, but every combination gave me no success. There is only yellow triangle in  Windows Device Manager :|
      Is there a way to bring my card to life?
    • By Ehm-Oh-Tea
      As the title says; is it possible to upgrade the old MSI 16f2 with any pascal card?
      Or is the 980M the highest possible?
      Looking forward to your answers. Thanks
    • By TechAce
      Hello, I need help trying to put my setup to work. I recently purchased an Akitio Thunder 2 with a GTX 1050 ti Superclocked to implement it as an eGPU for my system. I have a Macbook Pro 15” mid 2012. I’m not interested in using it with OS X (I’ve read that there is not much support by Apple for Nvidia cards Series 10). My main goal is to use it using Windows 8.1. I had some trouble with the initial connection as Windows recognized the external card but it gave me error code 12. I already got rid of the error 12 problem. The situation now is that I connected a second display through the HDMI port of the eGPU and activated it using the Nvidia Control Panel. After a restart I choose to boot windows 8.1 again but the two displays get hanged with black screens and I only see the cursor. Anybody has had this problem and was able to fix it?
      I did some further testing, decided to boot up with the eGPU connected but without the HDMI cable plugged. I was able to log in to Windows and the eGPU got recognized in device manager, but then I connected the HDMI cable and for one second I saw my Macbook screen displayed in the external monitor, then both screens hanged again with black screens only showing the cursor. I’m exhausted of experimenting and seeing no positive results...
      My goal is to be able to use the eGPU with the internal monitor of the Macbook (if that is possible with my system). If not, I would like to know how I can set it to work with a second display. I will be very grateful if somebody can help me... Sorry for the long post.
    • By baddea
      I want to know if i can using external gpu RX 480 GPU with windows laptop ASUS G751JT that have dgpu
      i need to using interal gpu  in my linux arch and second gpu to using with windows 10
      please i need answers
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.