Dreckiger_Dan

ah okay, again thanks! Unfortunately I´m not able to download your file: "Sorry, there is a problem The page you are trying to access is not available for your account. Error code: 2C171/1" It seems I haven´t the permission to download anything so I must wait to get a promoted user... regards Daniel

Many thanks klem!! I will try it and give asap feedback: Just to be sure: I have a 970m, you named the bios 980m. Was this in purpose? Regards

Hi Klem, thanks for fast response! =) I noticed this with Nvidia Inspector tool: when the GPU "loses Power" / throttles it switched to P8 State. This state ("energysafemode") is then active (135 mhZ) + voltage gets down. I wonder why the GPU switches to P8 state?! Maybe the GPU needs more voltage/power and can´t, so it throttles down. That´s why I asked for an OC VBios... The next question is: Does it make sense in my case to build a Vbios which always only have state 0 (Fullpower) ( + maybe fix the needed voltage) so that the GPU can´t throttle down? I attached my stock GPU Bios. (Clevo P 651SG / Schenker P505 Pro Nvidia Gtx 970m). thank you for the effort! Edited> Regards daniel StockBios_Clevo.rom

Hey guys, first of all - great forum, nice to see people helping each other! I try to make it short: I think my clevo P651se (Schenker) is broken but I´m not sure...I must verify that - The reseller (Schenker) says Mainboard broke - I have to buy a new one or at least a new mainboard about 1000 € oO ..hits me hard. As I can see in Afterburner, when my 970m hits the power target, it goes down to 135mhz and stucks there. It seems the card needs more power?! I can´t believe that because sometimes I can play for about a half hour or longer. Temps are ok! (about 80 degree celcius) I just want to play with this laptop or at least verify if its really broken or not So I thought I try an OC-Bios with a higher Powerlimit/ optimized Vbios. this Forum is my last hope, everything else I tried (new windows, actually Vbios, windows settings etc.) Of course I would donate a amount, thats not the problem :)! If this is the wrong thread - pls forgive me, I´m new here. Hope you can help me...Regards daniel