jakemog0007
-
Posts
69 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Everything posted by jakemog0007
-
Thanks m8.
-
What thickness thermal padding do you guys recommend 1mm or 1,5mm?
-
-
-
-
Just wanted to share. After applying Liquid Ultra thermal paste, my gpu stopped throttling @ 1.025+ and im able to get my core stable at 935 Mhz insted of 900 Mhz Currently at 935 core 1500 Mhz Mem, 1.050v.
-
Anyone else throttling with anything above 1.000v? anyone?
-
What exactly would we gain from doing that? :s
-
Doesn't really help :s on stock 0.975v i could get 880 core, now 925... I would prefer a card that could do 1050mhz
-
I officially have the gayest 7970m that exists.. Clocking at a whooping 925/1500 @ 1.025v Everything else crashes or throttles..
-
What do you mean by "had"?
-
at 1.025? 0.0 is your card one of the newer ones with vbios 021 / 022?
-
What are your clocks?
-
**CALLING OUT ANYONE** Does anyone have any ide to why my 7970m in my m17x r4 is throttling @ anything higher than 1.00v? Bios: 021
-
Is it possible to increase current to the gpu?
-
I can get 1600mhz vram and 900mhz core
-
Run afterburners osd while you bechmark and see if clocks stay stable the whole way, 0,975v cards ov to 1.050v tend to throttle after some time in 3d mode.
-
If your vbios is 017, why dont you simply flash one of the old vbios roms at page 1?
-
If you can max out sliders in ccc with 100% stable and no speed change then your not applying the clocks.. - - - Updated - - - could be downclocking..
-
- - - Updated - - - Just tried the vbios you made, AND IT FU***** WORKS!! thanks so much, but it still throttles Tink you could make a 1.100v one? thx alot again. Crysis 3 still throttles svl any ide why? I know you may not have much time to work on the new bios right now, since you are able to change my voltage the only thing left to fix is the throttling -Update It seems if i leave mem clock stock 1200mhz there is no throttling For core anything above 945mhz crashes, must be vbios/driver issue cus 950/1000mhz are stable for about 5 min before my pc goes black.
-
Ill try it out as soon as I can, thx for your effort so far.
-
This 0.975v is gonna be a big issue with the newer cards, funny how with the patcher i am able to change 2d voltages but not 3d... whats different between 2d and 3d voltages in the vbios?
-
Sorry, but where can i find the revision? And why post it on m15x forum?
-
Will clearing cmos help at all? (Pulling out mobo battery)
-
When i first got the laptop it was on 0.975v :/ can it be on a hardware level? Can change voltage in ccc but starts throttling