-
Posts
16 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Everything posted by tyriel
-
Hi @Klem, I want to unlock my Dell Latitude 5300 2 in 1 Bios, This is the bios https://www.dell.com/support/home/pl-pl/drivers/driversdetails?driverid=6c7yj&oscode=wt64a&productcode=latitude-13-5300-laptop
-
NVIDIA Maxwell VBIOS mods - 900m series overclocking versions
tyriel replied to svl7's topic in General Notebook Discussions
Maximum OC I write with a translator and sometimes translate nonsense, my oversight -
NVIDIA Maxwell VBIOS mods - 900m series overclocking versions
tyriel replied to svl7's topic in General Notebook Discussions
Pity :(, so there is no chance of OC memory? That's why I was wondering why now the bigger result, the same OC: D. So TDP is already at max. So in a nutshell, is it the max capacity of this GPU? -
NVIDIA Maxwell VBIOS mods - 900m series overclocking versions
tyriel replied to svl7's topic in General Notebook Discussions
Can not gently raise the voltage vram in gpu? Could this help? If you can raise the TDP limit in vbios, then this might help, I think so The card is MXM standard with good power section much more specific than soldered 960 / 860m series ... Btw lock 135mhz removed great thanks -
NVIDIA Maxwell VBIOS mods - 900m series overclocking versions
tyriel replied to svl7's topic in General Notebook Discussions
Unfortunately after uploading the bios to the GPU the system hangs or reboots I edited the memory clock to stock and the card works with this bios but the 135mhz lock still works ... :( I installed it on a laptop and it has OC lock on vram I do not know if it's a TDP lock, the temperature is ok max 76c (furmark) do you have a patent on it? I tried to edit the bios but every time the OC memory causes the card to become unstable even 100mhz cause blue screen sometimes, on the internet people write that the gtx960m / 860m with these memories is 6000mhz without problem and here is impossible, the card itself has a better power section from Soldered 960 / 860m and is better chilled, asic at 80.5% so very well ... Do you have any idea how to solve this? -
NVIDIA Maxwell VBIOS mods - 900m series overclocking versions
tyriel replied to svl7's topic in General Notebook Discussions
Hello Klem You recently helped me with K2100m, today I made an upgrade GPU to M2000M and here my request, could you remove the + 135mhz lock and turn the memory to effectively have 6000mhz instead of the original 5000mhz? Thanks a lot. GM107.rom -
WOW I do not know what you did but first it works like charm and secondly nothing changes I have higher GPU performance after flash this bios Before: http: //www.3dmark.com/3dm11/12215343 After http: //www.3dmark.com/3dm11/12216441 Thanks a lot
-
Everything Ok, core unlocked but as soon as I launch 3d applications no matter if OC card or not the laptop hangs and only restart helps :( back to stock Do you have any ideas why this is happening?
-
I found the bios to k2100m I uploaded it to my card and the card works with it now I have a great request Klem, could you remove the 135mhz lock on the core and unlock the voltage, etc. Thanks a lot. Bios in the attachment 1.rom
-
When i did this lcd flashing for 15 sec and nvflash give me backup.rom with 0kb size and total empty inside :(
-
Another no go If i try with nvflash lcd give me artifacts and nothing happened i must reset laptop to make him to work again
-
Jaki Laptop ? Bez obciążenia ja mam tyle na Gelid GC Extreme napisz jaki CPU w nim siedzi po temperaturach wnioskuję że i5?
- 7 replies
-
- thermal grizzly kryonaut
- pasty termo
- (and 6 more)
-
HP.QuadroK2100M.2048.130612.rom Gpu-z give me error (not supported device) i found bios for my GPU on https://www.techpowerup.com/vgabios/149851/hp-quadrok2100m-2048-130612 i think the same as main is this possible to made it for OC ?