johnksss

Hmm, I'm thinking your gonna need a little work Brian. Im at 5.0 ghz now.

lol! We shall see!

Nope, he over there on "scary" status..

With Ivy your right at the WOW look at how much voltage I need to go up a stage. You need to be in the 1.5V range and up. This chip can run on 1.9V under ln2. Had to go back and check... It's more like 5.4 ghz SS and 5.5 and up on ln2.

I do and it's 6.5 GHz max over clock on ln2. SS is like 5.5 to 6.0 GHz depending on the test. But I sold that chip to a friend. About to pick up another one later today.

Be very careful not to crush the die...I hear it's very easy to do.

Ok, so I went and picked up my card today and i must say, I'm liking it far better than my 7970.

it's running 3.0. Nice job! That stock score is worth 4 GL points on the bot. Didn't gpuz say they they were going to add it to 068? Because your looks just like Vince's. k|ngp|n`s 3DMark11 - Performance score: 20990 marks with a GeForce GTX Titan

You should. That's if you have the space for one.

Yep, suggestions are always nice. Also, when yuou go back and redo it. You can just put the paste on the die, then set the heatsink on top. twist it back and forth a few times then screw the screws down. Do not put the machine back together. Only attach the screen and a usb keyboard and mouse. Then boot to windows and start testing. This way you will know 100 percent before the machine is fully back together.

Did you check to make sure that you have all the correct pads in the right place on this card? All the screws are still tighten? No debris on the GPU die?

More like something wrong than sh!t cards.

No problem. LOL Get it going Jimbo! 1Ghz is a nice place to start.

Give this a try nvflash -4 -5 -6 vbios.rom Then hit Y twice for both cards. Adding these last two make the whole process automated. Meaning no intervention and the computer reboots. And boots windows. -y -A nvflash -4 -5 -6 -y -A vbios.rom

what set of flash commands are you using?

Try vantage and see if it does it there.

You have jokes Prema! LOL. Well I have faith in ya!

No problem. It's something we should look into, which is why im checking it out. It seems to be a 3dmark thing while the others can run fine. So the next thing woould be to find out is....What is different.

Have you gotten yours to the 9300 mark yet Prema?

In my last picture, I was in Single card mode. And it's only on this benchmark that this seems to happen.

It's an svl7 version. 1.1V.

That's not the vbios im using. And I just verified it's because of too much voltage.

It looks to be because of too much voltage. Speculation of course....

Edit: I see what your talking about...let me check.

What happen when you ran yours at stock and ran fire strike on normal?