bartolini9

Yeeeh. It works. I had AC adapter plugged in and power plan set to performance. The thing was that when I started the game or 3d Mark, the current clock immediately went up to 1134 and then to 1248 (Boost) like it should be. So everything works and it's unclocked. Thanks Prema for your BIOS Brgds.

Hi to everyone! I got a small problem with the overclocking my GTX 970M 3GB . I have a Clevo P670SE and I wish to raise the GPU and Memory clocks. I am using P6xxSE Prema Mod v2 for both BIOS and vBIOS. I use EVGA Precision and NVIDIA inspector software for overclocking. The thing is that I am able to overclock the memory, raise the core voltage but can't go with the core clock higher that 1037 Mhz (Boost clock). You can see it here below on the picture. GPU clock is set to be: 1134 Mhz (+210 Mhz) but Current Clock is blocked to be only 1037 Mhz. The memory offset works fine (+270 Mhz) and the voltage raised from 987 mV to 1050 mV. Any ideas how to unlock the core clock offset? I attached my vBios back up down near written with red letters. Thanks you very much in advance. Brgds.

Ok, I will follow your instructions about arrangement of the thermal pads, it's really helpful. I am going to use a Phobya thermal pads, they have a really good conductivity. Now, when I know almost everything I can find a 7970M card branded by Dell. Thanks a lot Nospheratu.

I think you should use this program amd_cleanup_util_1.2.1.0. AMD Catalyst Un-install Utility

Hello. I want to upgrade my current GPU which is M8900 aka 6970 in my M6600 Dell laptop. The choice is Radeon 7970M. Anyone knows that heatsink from 6970M will fit on 7970M card? During swaping, I guess I have to change the thermal paste (IC7) but what about thermal pads? Should I install the new ones? Thanks in advance

Hello, I am bartolini9 from Poland. I am looking for some information about my DELL M6600 with AMD M8900 card, and I hope you will accept me to your community Best regards