Jump to content
EwinRacing Flash Series Gaming Chairs

Woklbokl

Registered User (Promoted)
  • Content Count

    44
  • Joined

  • Last visited

  • Days Won

    1

Woklbokl last won the day on May 28 2013

Woklbokl had the most liked content!

Community Reputation

23 Semi Elite

About Woklbokl

  • Rank
    Member
  • Birthday 12/05/1989
  1. Just increased voltage for P8, P5 and P2 power states. Some users had some stability issues cause their reference P8, P5 and P2 voltage was too low and they ended up getting greenscreens and ugly stuff like that. Should be stable for everyone now. There is no need to update if it was stable for you before.
  2. Whats wrong with the 780 OC Edition v03? If it's just about the clock speeds, imagine 100 people requesting a modded bios for their prefered clock speeds. You're card uses a reference pcb, OC Edition v03 is all you need.
  3. Use the non downsampling version and wait for a fix. Don't ever edit a svl-7 bios, atleast if you don't know what you're doing.
  4. The voltage for the lower power states is just not high enough. Many cards have these problems with the downsampling version of the bios. You'll need something like 0.912V for every power state except P0. I already told svl7 about that, but it seems he's kinda busy right now.
  5. That doesn't work. 1.21V is the bios limit, setting it to a higher value would have no effect.
  6. Some people from german hardware-forums already tried this. Performance drops under gtx 780-standards. Wouldn't recommend it
  7. It will drop to 901Mhz if utilisation is too low, which is normal and you shouldn't worry about that. Looks like you have v3.
  8. You can tell which version your using by trying to undervolt your card. Afaik you can't undervolt below 1.15V with v2. Downclocking is normal if gpu-utilisation is too low. If you change the driver setting to maximum performance you'll always get the baseclock which should be 901mhz with this bios. If you choose adaptive it'll drop below 901mhz if u have a low gpu-utilization. You were able to buy svl7 a peer in the past, dunno why the donation button has been removed from the threads/his profile. I hope he has enough beer
  9. Any updates on an Titan ACX Edition? I played a bit with the reference bios. I think it should be enough to lower the fanspeed of v3 of your bios to 20%. That should make the fan curve behave less agressive, too. i hope you find the time to do this, there is no way i'm going back to reference bios or any other bios with boost after using your bios for several months now. greetings
  10. Use Afterburner OSD, any other tool with read bios information. Only Afterburner reads voltage directly from the NCP.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.