I've a really weird problem. My laptop has started beeping when use nvidia gpu yesterday. I dissambled my laptop and tried to plug out every single hardware and test them one by one. There's 22 beeps and equal interval beetween them. It goes shutdown after that 22 beeps.
My laptop is Clevo W650SJ and it uses Nvidia 840M gpu. That problem isn't causing because of windows or installed driver cos i tried to reinstall windows but it started to beeping when w10 installer check devices. Also I've bios password on startup , if i don't type password and hit the enter , it starts beeping after 10-15 sec. Also fan speed goes up to maximum and it doesn't slow down untill i shut it down or shutdown itself.
If i use any program or run a game which uses nvidia gpu , it starts beeping but if i close the game on first beeps , beeping is stops. But fan speed still maxiumum until i shutdown to pc.
I am looking a way to fix it. I didn't make any changes on my pc before than this problem.
So on occasion I host gaming nights over at my house, and usually end up hooking my laptop up to a big TV so me and a couple friends can all play all kinds of multiplayer games (either emulated or off of steam).
But I was recently thinking that it would be fun to get a projector set up, so that we could play on a huge blank wall in my living room.
With that being said: I'm new to purchasing projectors, so I'm not familiar with what kinds of features/specifications I should be looking for (and I'd like to keep the cost down if it's possible).
So I was wondering if anyone has any advice for me on what to look for in features/specifications, affordable places to buy from, or just general info on what I'm trying to do.
Any help would be super appreciated!
I'm debating whether or not to replace the thermal paste in my Lenovo y510p. I've started overclocking a bit, and I have an external fan, but I would like to not have to run the fan as fast because it is a little loud. I have been reading a bit about different thermal pastes, and I'm wondering if there is even a big difference between stock thermal paste, and something like the liquid metal from thermal grizzly. It sounds like it'd work better, but I don't want to fall for a good marketing scheme. If anyone has experience with this and has or hasn't seen big differences, your input would be greatly appreciated.
Thanks in advance!
I have an XMG u705 with the an í7 4790k, a Geforce GTX 980M 8GB, G-Sync Monitor, 32GB DDR3 RAM, etc. and I am damn annoyed by both the Mainboard Bios and Vbios, because both are the cause for a ton of driver issues under Windows 10. Also I can't use my lately bought Samsung 970 Evo, even though technically there should be nothing preventing it. Heck I was even able to install Windows 10 on it, because the Windows 10 installer detected it, just not the Bios which is logically why I cannot boot from it. -.-
So in search of a solution, I searched the web and found out that there are several mods for both bios made by devs like Prema. Unfortunately some Bios mods I found are heavily outdated, unfinished, ... or not anywhere secure and I couldn't find any location where I could download Prema's Mods for this device, especially not on his Site (just a Subscribe banner there) or his older Wordpress site (errors). There is also nothing here under Downloads/Clevo/P77xZM.
I would be really thankfull if someone could help me.