ragingazn628 93 Posted September 26, 2011 Hey guys,I completely forgot how to use ThrottleStop. What settings do I need to maximize my 2630QM's overclocking performance? Quote Share this post Link to post Share on other sites
mw86 1362 Posted September 26, 2011 I will recommend checking cmod or chipmod to 100% whichever your cpu uses for throttle. lock multiplier at turbo for benches. Baseclock for increasing your speed. Quote Share this post Link to post Share on other sites
ragingazn628 93 Posted September 26, 2011 I will recommend checking cmod or chipmod to 100% whichever your cpu uses for throttle. lock multiplier at turbo for benches. Baseclock for increasing your speed.Baselock? Can't find that anywhere Quote Share this post Link to post Share on other sites
svl7 5658 Posted September 26, 2011 If there's a Baseclock option for your system it can only be found in the BIOS, that's also the only way to overclock a non-extreme CPU. Not much TS can do here, only the stuff mw86 already mentioned, but this won't change a lot in your system. Quote Share this post Link to post Share on other sites
ragingazn628 93 Posted September 26, 2011 Do I edit the TRL / TPL / C7 / DTS / CLR? Quote Share this post Link to post Share on other sites
mw86 1362 Posted September 27, 2011 Do I edit the TRL / TPL / C7 / DTS / CLR?those are helpful on XM chips except if in Throttle stop you hit dts it will show not the temperature but rather the distance in celcius from the thermal limit which is probably set at 100C. If you have an unlocked bios you can enable C7 and it will help stay just a little cooler and use a tiny bit less watts on idle... most of the C-state options are not exposed on a bios that isn't unlocked. Quote Share this post Link to post Share on other sites
