Jump to content
EwinRacing Flash Series Gaming Chairs
J95

Unlocking Overclocking Maxwell 900M Series

Recommended Posts

So what's up with the new drivers:

341.44

345.20

that were just released?

Did they block this trick? Do they perform better than one in OP? Or is it a real security patch with no strings attached?

Share this post


Link to post
Share on other sites
So what's up with the new drivers:

341.44

345.20

that were just released?

Did they block this trick? Do they perform better than one in OP? Or is it a real security patch with no strings attached?

Seems odd to release drivers with older numbers. I wouldn't trust nVidia right now.

Sent from my Nexus 6 using Tapatalk

Share this post


Link to post
Share on other sites

I could still overclock so I guess they aren't nerfed drivers :P

Got a -14 in firestrike though compared to the 344.80 drivers so I guess I'll still stick to 344.80 until the real new drivers come out.

Share this post


Link to post
Share on other sites

14 points is well within the margin of error. Curious.

Sent from my Nexus 6 using Tapatalk

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
i posted this work around beginning of feb on guru3d forums but no one cared & on the geforce forums.

just thought i'd mention it.

http://forums.guru3d.com/showthread.php?t=396687

I used this fix/1 (blank screen), 31 installs + 40 hours testing. Only achievable using the kernel mode driver module with matching nvapi.dll version, allowing OCing without breaking Modded vBIOS unlocked options, v346.87/r346_00_186 instead.

Share this post


Link to post
Share on other sites

I didn't have to use a matching nvapi.dll, overclocking worked with the just kernel mode driver for me and there were no blank screens. i guess your solution was about more than overclocking from the looks of it.

Share this post


Link to post
Share on other sites
I didn't have to use a matching nvapi.dll, overclocking worked with the just kernel mode driver for me and there were no blank screens. i guess your solution was about more than overclocking from the looks of it.

NV Inspector, MSI Afterburner and Precision X won't work correctly unless nvlddmkm.sys & nvapi.dll are v346.87, taken from my previous 780M/LGD02C5 blank screen fix(2) broken OCing options.

This result is not achievable using nvapi.dll v347.xx/clock-blocked.

xeOBg6a.png

Share this post


Link to post
Share on other sites
Thanks much for your efforts, @J95. The driver tweaks worked perfectly!

No problem, latest v347.88 restores OCing but performance isn't good. This mod works with v347.88 without issues. I'll update OP.

Share this post


Link to post
Share on other sites

Anandtech has a good article on overclocking a P770ZM: AnandTech | Clevo P750ZM: GTX 980M Overclocking Investigated

The article mostly focuses on GPU overclocking as the author notes that overclocking the 4790K may introduce some cooling issues. I found the section on power requirements very enlightening. I think most people - myself included - assumed that a 230W power supply would be more than sufficient. However, the power usage charts show otherwise. If you are heavily overclocking both the 4790K and the 980M, you are probably exceeding the power ratings on the 230W block.

Share this post


Link to post
Share on other sites

indeed, which u can also see in the batcave OP where i did power measurements with everything overclocked :) check my sig for that

ps: its the p750zm btw, not the p770zm ;)

Sent from my Nexus 5 using Tapatalk

Share this post


Link to post
Share on other sites
indeed, which u can also see in the batcave OP where i did power measurements with everything overclocked :) check my sig for that

ps: its the p750zm btw, not the p770zm ;)

Sent from my Nexus 5 using Tapatalk

Good charts, @jaybee83. They definitely show that a hard core overclock with the 230W PSU would be pushing the PSU's limits. I wonder if the "whine" that some owners are reporting is because of they are exceeding the power rating on the PSU. *shrug* I was concerned about noise, but my unit has been very quiet. However, my CPU is locked and undervolted at 4 GHz, and I only marginally OC the GPU. Other than an audio driver issue I had early on, this unit has been flawless.

Share this post


Link to post
Share on other sites

How far did you manage to overclock a 970M ? overclocking the Gpu clock is dangerous more than the memory and can cause some Micro Stuttering / Slow Performance fps after some time in a game even if the benchmark worked fine.

with drive 347.88 the overclock works

Share this post


Link to post
Share on other sites
Guest

Hello bro i just ask if these driver can work on windows10 64 Bits ??? its also possible ?

Share this post


Link to post
Share on other sites

Hello, is this driver downgrade the only way to restore overclocking without changing the vbios?

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.