Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

HP HDX 18/ Intel Core 2 Duo Q9000 @2ghz/ Nvidia GT130M /Blu-ray Rom CD/DVD-RW/ 500gb 7.2K RPM

*Feel free to make fun of my second paste job, first re-pasting job ever. (I Know that was a horrible smear of paste) There was definitely 20-30 degree F drop in temperature under heavy usage and greater during idle.

This is my brothers system I cleaned out.

Imageshack Album Part 1

http://imageshack.us/g/163/201106230237.jpg/

Imageshack Album Part 2

http://imageshack.us/g/88/201106230243.jpg/

Edited by mw86
  • Thumbs Up 1

Share this post


Link to post
Share on other sites

Most of your page is blank, tried to reload it several times... either my browser has problems with it, or something else is wrong. So I can't make fun of your paste job, since I can't see it... :D

Could you check whether it loads for you? And maybe put the guide in a spoiler, the post is so loooooooooooooong :D

  • Thumbs Up 1

Share this post


Link to post
Share on other sites

@StamatisX Yeah... it's really pathetic and to me its a design flaw common to a couple of mid-range or lower laptops. That Dell Inspiron 17 I cleaned out had a similar setup. This one has the Nvidia gpu GT130M and the Inspiron had a old Intel graphics chip. The Inspiron stayed cooler but that was just a Core 2 Duo 2.4ghz and this HP has Quad Core Intel Q9000 @ 2ghz. The Inspiron had a heat-sink that was not flush with fan housing. After that was fixed it ran much cooler. The HP under higher end games suffers from GPU throttling due to heat... after the re-paste with Arctic Freeze Mx-4 the system seems to stay dramatically cooler. I am not sure if there is still a chance to Throttle but it shouldn't at those temperature differences. On stock config though on that HP it definitely would throttle when I had that model. Like you mention Stam... when that Q9000 gets over 150F it draws too much heat over to the GPU even when the GPU is being utilized or not it heats that sucker up. My brother Maxx (non-identical twin) had his CPU reaching 179 F (just casual low end graphic RPG games being played while skyping and surfing the web which is too hot for not even utilizing all those 4 cores...) and not sure about the GPU temp but it would cause stuttering and other issues since the CPU copper piping is connected to the GPU copper piping. It's a nice big laptop flawed from inside. Overall not a bad computer but it ruined its chance to be a mid-range larger gaming notebook from this.

Edited by mw86

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By Hax
      I have tried to update nvidia drivers of my notebook ge72vr6rf apache pro. The only drivers that works are the ones provided by the msi. The problem is that they haven't updated those since 2016 and I can't play newer games. 
       
      Some say you need to mod your 1060 drivers, which I have no idea how to some says you need to update the flags in ini files. So please help me
       
      Thanks for your time.
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       

      View full article
    • By Brian
      Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
       
       
    • By Brian
      Well that didn't take long for NVIDIA to respond to Navi. The new 436.02 Game Ready Driver adds the following features:

      Game Ready
      Provides increased performance and the optimal gaming experience for Apex Legends, Battlefield V, Forza Horizon 4, Strange Brigade, and World War Z
      Gaming Technology
      Adds Beta support for GPU Integer Scaling Adds Beta support for Ultra-Low Latency Mode Adds support for new Freestyle Sharpen Filter Adds support for new G-SYNC compatible monitors Driver release notes: https://us.download.nvidia.com/Windows/436.02/436.02-win10-win8-win7-release-notes.pdf


      This isn't the old max pre-rendered frames setting, its supposedly a new improved algorithm that matches AMDs anti-lag feature for Navi.

      Next up is support for integer scaling which Intel recently announced but it seems NVIDIA beat everyone to the punch. Unfortunately, this is only for Turing for now:


      Additionally NVIDIA has created a new filter for FreeStyle simply called "Sharpen" which improves performance and visual clarity that is supposed to be on par with RSI but with much broader support and granular adjustment. According to Eurogamer, "They also point out that the amount of sharpening can be adjusted from 0 to 100 per cent, applied on a per-game basis and works with games across all major graphics APIs: DX9, DX11, DX12 and Vulkan".


      Finally, the driver brings with it some game performance improvement, including very popular titles like Apex Legends which sees up to 23% boost at 1080p:



      Overall a pretty solid release, it had some issues earlier when it was released with GeForce Experience being force installed but it should be remedied by now.

      View full article
    • By Brian
      Well that didn't take long for NVIDIA to respond to Navi. The new 436.02 Game Ready Driver adds the following features:

      Game Ready
      Provides increased performance and the optimal gaming experience for Apex Legends, Battlefield V, Forza Horizon 4, Strange Brigade, and World War Z
      Gaming Technology
      Adds Beta support for GPU Integer Scaling Adds Beta support for Ultra-Low Latency Mode Adds support for new Freestyle Sharpen Filter Adds support for new G-SYNC compatible monitors Driver release notes: https://us.download.nvidia.com/Windows/436.02/436.02-win10-win8-win7-release-notes.pdf


      This isn't the old max pre-rendered frames setting, its supposedly a new improved algorithm that matches AMDs anti-lag feature for Navi.

      Next up is support for integer scaling which Intel recently announced but it seems NVIDIA beat everyone to the punch. Unfortunately, this is only for Turing for now:


      Additionally NVIDIA has created a new filter for FreeStyle simply called "Sharpen" which improves performance and visual clarity that is supposed to be on par with RSI but with much broader support and granular adjustment. According to Eurogamer, "They also point out that the amount of sharpening can be adjusted from 0 to 100 per cent, applied on a per-game basis and works with games across all major graphics APIs: DX9, DX11, DX12 and Vulkan".


      Finally, the driver brings with it some game performance improvement, including very popular titles like Apex Legends which sees up to 23% boost at 1080p:



      Overall a pretty solid release, it had some issues earlier when it was released with GeForce Experience being force installed but it should be remedied by now.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.