misiozol Posted March 11, 2017 Share Posted March 11, 2017 (edited) Successful implementation on HP like in title, had bit of trouble but setup1.35 came with help and lot's of reading as was getting error43, Well now it's working perfect I won't tell how much I did scored in banchmarks as it's irrelevant to me but I will tell u you however what games and what settings are set on them @ 1080P on external display , fallout4: ultra , witcher3: ultra ,dark souls3: max , farcray primal: only high as frame rate drops below comfy lever and i get this crazy flickering otherwise ( I think card is just to slow) , bus usage in all cases is max 80% according to gpu-z . Made as well custom acrylic case as in attached photos, temps. in side do not go over 60*C and fan speed does not go over ~40% according to gpu-z , and when judging case keep in mind that is first time I have made something acrylic Edited March 11, 2017 by misiozol 2 Quote Link to comment Share on other sites More sharing options...
rawinek Posted March 15, 2017 Share Posted March 15, 2017 It looks great in this transparent box. Please, tell me what power supply do you have? 1 Quote Link to comment Share on other sites More sharing options...
misiozol Posted March 20, 2017 Author Share Posted March 20, 2017 Dell sx280 or Model Number - D220 P-01 Part Number - Type: DA-2 same psu but looks much cleaner than ATX Quote Link to comment Share on other sites More sharing options...
misiozol Posted July 10, 2017 Author Share Posted July 10, 2017 Some update , after multiple PSU failures decided to go with xbox360 PSU it has 16.2A and works perfect for this setup Quote Link to comment Share on other sites More sharing options...
anternal Posted September 11, 2017 Share Posted September 11, 2017 Can you post some screenshots of GPU-Z? some benchark scores? Quote Link to comment Share on other sites More sharing options...
misiozol Posted September 15, 2017 Author Share Posted September 15, 2017 (edited) Gpuz is showing regular gtx980 OC card has been overclocked with custom bios as well, not much to show there, about benchmarks not done any as was no need everything is working as it should , unless u have any particular in mind then can do one or two Edited September 15, 2017 by misiozol Quote Link to comment Share on other sites More sharing options...
DoPE csgoroll.com csgoatse.com Posted November 14, 2017 Share Posted November 14, 2017 Very nice looking but I m interested in the Performance of this Setup. Quote Link to comment Share on other sites More sharing options...
misiozol Posted November 19, 2017 Author Share Posted November 19, 2017 B more specific . Quote Link to comment Share on other sites More sharing options...
dubylee Posted December 8, 2017 Share Posted December 8, 2017 LED LOOKS BEAUTIFUL! Quote Link to comment Share on other sites More sharing options...
misiozol Posted September 23, 2018 Author Share Posted September 23, 2018 (edited) Can confirm that drivers 399.07 are holy grail as they work with out setup1.35 there is NO NEED for it, no more error43 Edited September 23, 2018 by misiozol Quote Link to comment Share on other sites More sharing options...
Matic_LMS Posted December 17, 2018 Share Posted December 17, 2018 On 7/10/2017 at 9:09 PM, misiozol said: Some update , after multiple PSU failures decided to go with xbox360 PSU it has 16.2A and works perfect for this setup misiozol How did you conect the xbox power suply, to which port on the EXP-GDC V8.4 did u conect it 12v jack or the 8 pin, from which xbox was te suply and can u send some new photos...? Quote Link to comment Share on other sites More sharing options...
misiozol Posted December 28, 2018 Author Share Posted December 28, 2018 (edited) What I did was to use old xbox removed socket and made with socket , can snap few photos but they will no not give any visualization as did made it with mosfet for egpu to operate it and all is encapsulated with hot glue , you can can do it with simple switch there are tons of pinouts for xbox PSU bit of soldering and common sense will do the job , is connected to 8pin as jack is no good for providing 16A , simple cut and connect , PSU is from first xbox360 easy to spot as it say on it 16.2A Edited December 28, 2018 by misiozol Quote Link to comment Share on other sites More sharing options...
zsolti900 Posted January 21, 2019 Share Posted January 21, 2019 Can we see FPS test? Quote Link to comment Share on other sites More sharing options...
misiozol Posted January 30, 2019 Author Share Posted January 30, 2019 On 1/21/2019 at 10:17 AM, zsolti900 said: Can we see FPS test? of what ? Quote Link to comment Share on other sites More sharing options...
misiozol Posted October 18, 2019 Author Share Posted October 18, 2019 If any one is interested acrylic case is now for sale , PM me or mail for more info. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.