-
Posts
6 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
DoPE csgoroll.com csgoatse.com's Achievements
Curious Beginner (1/7)
0
Reputation
-
Have you tryed to change the used graphics card for an Application in the Nvidia control panel?
-
I`m using a gtx 780m which basically is a Gtx 880m just with a little less core frequency and all in all about 10% faster and Games like Battlefield 1 are still playable with 60 FPs if you reduce the settings or resultion.
-
@Mr. Mac you should look in the Download section on Prema`s Profile
-
First off all Hello, I recently installed Sandisk Dashboard and Found out that my 256 gb Sandisk Ultra Plus is only using a 3 Gb/s connection instead of a 6 Gb/s connection. After that I installed Intel RST to get the latest AHCI driver but the connection changed to 1.5 GB/s instead of 6 Gb/s. Than I reinstalled Windows 10 with uefi Boot enabled just to try that out but it didn`t changed it either. I checked the Speed with AS SSD benchmark and got around 240 mb/s read and 220 mb/s write speeds with the standard windows AHCI driver and around 120 mb/s read and 110 mb/s write speeds with the latest available IRST drivers. So I wanted to know if anybody can help me to get the full 6 GB/s connection that should be possible with SATA 3. I also tryed reflashing the bios. PC specs: Clevo P150SM with I7 4700qm GTX 780m 8GB RAm 256 Gb Sandisk Ultra Plus in SATA Port 0 & 500gb HGST SATA 3 drive in SATA Port 5 Latest drivers installed exept IRST because it slows the PC down Latest Bios flashed