saml01 Posted February 25, 2016 Share Posted February 25, 2016 (edited) I have a Clevo 970m in my GT70. When I first installed the card I had to fumble around with the INF file to get the nvidia driver installer to detect the card during installation. After a lot of trial and error got a working driver by modifying the strings in Section 27 because it seems most of the cards fall into that config, but I still feel that its not correct. This is the string I am using: %NVIDIA_DEV.13D8.110C.1462% = Section027, PCI\VEN_10DE&DEV_13D8&SUBSYS_110C1462 All the Clevo 970m's hardware id's should contain the 110C, and I assume thats a common one, but the stock driver does not have it. Seeing as how this is a pretty common card, I wanted to see if I am the only one having this issue and if I am not, does anyone have a link to the INF modification specifically for this card? Thank You Edited February 25, 2016 by saml01 Quote Link to comment Share on other sites More sharing options...
Bloetschkopf Posted February 26, 2016 Share Posted February 26, 2016 Use the MSI Vbios. GTX970M.rar Quote Link to comment Share on other sites More sharing options...
saml01 Posted February 27, 2016 Author Share Posted February 27, 2016 (edited) 9 hours ago, Bloetschkopf said: Use the MSI Vbios. GTX970M.rar What if I want to use Svl7's bios? I should have mentioned, I have that bios currently flashed. Is the one you linked for the 6gb version. Edited February 27, 2016 by saml01 Quote Link to comment Share on other sites More sharing options...
Bloetschkopf Posted February 28, 2016 Share Posted February 28, 2016 Yes,6GB Quote Link to comment Share on other sites More sharing options...
saml01 Posted March 1, 2016 Author Share Posted March 1, 2016 (edited) On 2/26/2016 at 11:47 AM, Bloetschkopf said: On 2/28/2016 at 0:46 PM, Bloetschkopf said: Yes,6GB This is what I get upon attempting to flash it: WARNING: Firmware image PCI Subsystem ID (1462.1141) does not match adapter PCI Subsystem ID (1462.110C). WARNING: Firmware image Board ID (E905) does not match adapter Board ID (E906). Please press 'y' to confirm override of PCI Subsystem ID's: Overriding PCI subsystem ID mismatch ERROR: Board ID mismatch I am using MNVFlash. Should I just add the -o3 command and over ride it? Edited March 1, 2016 by saml01 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.