Whag Posted November 4, 2014 Share Posted November 4, 2014 Hi everyoneI spent the last 6 month building a r2 (almost) from scratch. I finally have enough parts to try to boot it, actually fans starts, LEDs fires up, but then then fans stops... no beeps, no post...Do anyone have an idea on what I could do? I tried to boot without RAM or CG to force some beeps but it doesn't change anything. I'm actually missing the "left" (master ?) cg fan so I could only try on the slave slot, does it makes a difference ? Quote Link to comment Share on other sites More sharing options...
Whag Posted November 8, 2014 Author Share Posted November 8, 2014 Hummm Got a fan, replugged everything with care ( as always ), no more lights, no more fans turning, no sign of power... :/ is there a way to check if the MOBO burnt (even if I don't how it could) ? Quote Link to comment Share on other sites More sharing options...
Whag Posted November 9, 2014 Author Share Posted November 9, 2014 Power is back! this shit WILL POST or I'll die trying ! Quote Link to comment Share on other sites More sharing options...
Khenglish Posted November 9, 2014 Share Posted November 9, 2014 Wait so you have a card in the slave slot but not the master? Please clarify. Only the master can output a video signal.Assuming you do have a card in the master slot, we don't know if the BIOS is set to use the dGPU or iGPU. Use a multimeter to check for a CPU core voltage, iGPU voltage, dGPU voltage, and memory voltage. I can show you where to probe in a picture if needed. Quote Link to comment Share on other sites More sharing options...
Whag Posted November 9, 2014 Author Share Posted November 9, 2014 Hi Khenglish thanks for your answer, I received my fan for the master slot so I can now check both. I am actually trying to plug/unplug everything between reboots to see if I can understand where it comes from, pictures for the probe will be greatly apreciated Only thing i have so far is fan turning for some seconds and backlighting, still have no beeps, nor pre-post flashing LEDs (caps/scroll/num) Quote Link to comment Share on other sites More sharing options...
Whag Posted November 11, 2014 Author Share Posted November 11, 2014 ok I think I tryed every obvious possibilities I can't get more than led and fans...without any CG it should boot on hd3000 right ? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.