Jump to content
EwinRacing Flash Series Gaming Chairs

Recommended Posts

I tried to extract the .bin from the .exe (on Dell's website) using PhoenixTool v.273, and in a way it worked... I want to change the TDP values on my 1060mq but when I tried to open the .bin in Mobile Pascal TDP Tweaker, this is what happened. Can somebody help me? Here's the original .exe and the .bin. Thanks!

 

(note: I wasn't able to extract the bios using AFUWINGUI64 or any other similar tool as I think Dell has some type of guard or protection against that, suspecting that's also the cause of my current issues...)

Edited by alwon

Share this post


Link to post
Share on other sites

Found out that it was because of NVIDIA's vBIOS encryption for pascal cards and the fact that Mobile Pascal TDP Tweaker is no longer being updated anymore (I think). Bump either way, if anyone knows whether or not I can do anything in this situation (would rather not buy a BIOS programmer if not necessary).

Share this post


Link to post
Share on other sites

That's because it's not an actual rom; there's still padding on that hdr file. Could extract it further, but since you're only interested in the embedded vbios you might as well extract the 1060M's oprom with MMTool. After that TDP Tweaker works fine (just tested it).

Flashing the file is another thing. Iirc, direct flashing a vbios with nvflash will no longer work due to the new protection system. Maybe that isn't a problem with oproms though and the afuwin overrides will do the trick. So start MMTool again and use the 'Oprom -> Replace' option to substitute your modified bios. The 1060M's device id is 1C20 (and vendor is 10DE).
 

Share this post


Link to post
Share on other sites

Does this work ?

 

 I did a liquid metal mod to my 7577 GPU and CPU and temps are really nice now with fully load on gpu and cpu but these "fuckin" limit reduces the power exactly when its needed... 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By laxus
      i want to ask two favours and a question from this community ..
       
      1.) Can someone mod my 940 mx to increase the target temperature and allow higher overclocking than 135hzband voltage control
       
      2.) Allowing my i5 7200U to be undervolted to reduce overall heat 
       
      The question : I repasted my gpu and cpu cleaned it thoroughly, made sure twice everything is connected properly, use a cooling pad and yet the upper portion of my chasis above f1-f12 keys is so hot that i can roast peanuts on it. 
       
      (if i left out any info or missed something please reply i would really love to have a page that has everything for people who have this laptop specifically for light gaming.)
    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad L440.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.
      Important!
      For creating bios backup and to flash bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2322090.m570.l1313&_nkw=USB+Programmer+Ch341&_sacat=0
       
      https://www.amazon.com/s?k=ch341a&ref=nb_sb_noss_2
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/programming-EEPROM-Programmer-EZP2010-RT809H/dp/B075CGH1X1/ref=sr_1_18?dchild=1&keywords=SOIC8+clip&qid=1631766855&s=electronics&sr=1-18
       
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
       
    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad X250, X260.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, then you can post your request in this thread.
      Important!
      For creating your personal bios dump and to flash your bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2322090.m570.l1313&_nkw=USB+Programmer+Ch341&_sacat=0
       
      https://www.amazon.com/s?k=ch341a&ref=nb_sb_noss_2
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/programming-EEPROM-Programmer-EZP2010-RT809H/dp/B075CGH1X1/ref=sr_1_18?dchild=1&keywords=SOIC8+clip&qid=1631766855&s=electronics&sr=1-18
       
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
       
      Note: 
      Each bios mod prepare personally and based on your personal bios dump which contain your personal data like Serial numbers, UUID, Service TAG, MAC addresses, Windows keys, NVRAM settings, etc.
      For creating your personal bios dump and to flash bios mod, you need use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
      Just dump your Bios (from your laptop) using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad T450s.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden additional menus and settings in bios setup menu, or already upgraded Display and after that can't adjust screen brightness, then you can post your request in this thread.
      Important!
      For creating bios backup and to flash bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2322090.m570.l1313&_nkw=USB+Programmer+Ch341&_sacat=0
       
      https://www.amazon.com/s?k=ch341a&ref=nb_sb_noss_2
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/programming-EEPROM-Programmer-EZP2010-RT809H/dp/B075CGH1X1/ref=sr_1_18?dchild=1&keywords=SOIC8+clip&qid=1631766855&s=electronics&sr=1-18
       
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
       
    • By Klem
      In this thread you can post your requests for Lenovo ThinkPad X240.
      If someone wants upgrade Wi-Fi card and remove whitelist, or unlock hidden advanced menus and settings in bios setup menu, or upgrade to new display (and don't lost a brightness control), then you can post your request in this thread.
      Important!
      For creating your personal bios dump and to flash your bios mod, you must use any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip!
       
      Just dump your Bios using any SPI programmer  (like CH341A programmer) and a SOIC8/SOP8 test clip, then post it in this thread or upload it to any fileserver and send me the link.
       
       

      CH341A programmer:
      https://www.ebay.com/sch/i.html?_from=R40&_trksid=p2322090.m570.l1313&_nkw=USB+Programmer+Ch341&_sacat=0
       
      https://www.amazon.com/s?k=ch341a&ref=nb_sb_noss_2
       
      SOIC8/SOP8 test clip:
      https://www.ebay.com/itm/Soic8-Sop8-Flash-Chip-Ic-Test-Clips-Socket-Adpter-Bios-24-25-93-Programmer/201414947737?hash=item2ee5443399:g:up8AAOSw1Fda8qkt
       
      https://www.amazon.ca/programming-EEPROM-Programmer-EZP2010-RT809H/dp/B075CGH1X1/ref=sr_1_18?dchild=1&keywords=SOIC8+clip&qid=1631766855&s=electronics&sr=1-18
       
       
      How to use it:
       
      Also, you can search on YouTube a lot of guide for CH341a.
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.