Ajayajayaj Posted February 11, 2017 Share Posted February 11, 2017 I am very new to this stuff, but i decided to try to do an eGPU setup. I have the EXP GDC Beast, a GTX 1050, and an EVGA 500 Watt power supply. I have the beast plugged into the power supply with the long 20 pin connector and the 4 pin connector labeled "CPU", but the beast and the PSU never turn on. There are no fans on and no lights. I can get it to turn on for half a second, then turn off again, if I unplug everything, then plug in the HDMI(plug that connects to computer), then the power, but it seems like that will break it, and this only happens when the left switch is set to "PWR". I have the left switch set to "ATX", and the right set to off. I have no whitelist because I have an Asus laptop, and the laptop turns on as if the GDC beast is not connected. Have any of you had this problem, I am stumped right now. Thanks! Quote Link to comment Share on other sites More sharing options...
Masterchief88 Posted May 10, 2017 Share Posted May 10, 2017 Hi, i want to use the same adapter with an GTX 1050TI. But i never testet the buttons on the EXP site. I connected with my ATX and it runs fine. Green led turn on and all startet. What kind of connection do you use? I have PCIe mini and ExpressCard i startet fine. Quote Link to comment Share on other sites More sharing options...
Ajayajayaj Posted May 10, 2017 Author Share Posted May 10, 2017 Hey, thanks for replying. I got it working. It was dead on arrival and I got a new one. I am using mini PCIe. Quote Link to comment Share on other sites More sharing options...
Tekoz Posted December 11, 2018 Share Posted December 11, 2018 good to know it worked Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.