Klem

I am running the 331.82 drivers already. This is the setup I have that is stable and doesn't have problems:

[ATTACH=CONFIG]10102[/ATTACH]

The modified bios is: Clevo 670mx (3GB) - 80.04.58.00.03_'OC edition'_rev02

from the forum.

My system bios is the stock np9150.

As soon as I go above +135, like +150, and slightly increment the voltage, I am already crashing/ automatically resetting the settings to 0/0 in inspector. The temps never go past 65 C either so I'm not overheating during these crashes. The 0.837 voltage is just from my idle state, It is 0.925 under load conditions with the above settings.

MSI afterburner/evga precision won't let me modify voltage. And the 3d mark tests don't pick up the oc changes. Only when I use inspector, is when 3dmark properly runs the current settings.

Post here your stock vbios.

Thanks for reply!

Of course but this is for CPU throttling issue, not GPU

How much power have your AC adapter? 150W or 180W?

Hi, i had used the vbios for Clevo 670mx (3GB) and now i can raise core clock to +542 (for +135 before) but its all the change i've got.

I still can't change core voltage.

Did i do something wrong?

Thanks

Voltage adjustment work with program Nvidia Inspector (no MSI Afterburner).

Under what menu are you able to modify ram frequency of your ram?

Sent from my SCH-I605 using Tapatalk

You need another mod bios for memory adjustment.

Is there any way to adjust gpu settings for my G75VW with the 3GB GTX 670?

Sent from my SCH-I605 using Tapatalk

What kind gpu settings for 3GB GTX 670 you want to adjust? Are you to try mod bios from the first post of this topic?

Yes, with unlocked main system bios, you can set +200 MHz on your i7 4700mq.

is there any way to OC past the +135MHZ the GTX 765M of the G750JW (ASUS) ?

http://forum.techinferno.com/asus-gaming-notebook-forum/4638-overclocking-asus-g750jh-gtx780m-3.html

Hi, is it possible to unlock the Bios for a Barebone (Whitebook) 1763-001 (GT70-2OD equivalent with 780m GTX) ? Attached my Bios Backup.[ATTACH]9945[/ATTACH]

Yes. It`s possible. See your PM.

Hey it is possible to get a unlocked BIOS file for my MSI GT70-2OC???

Would be very nice !

Put your backup of bios here or send me to my email.

BF4 20-5 fps at high settings, for me quite playable,i need the modded 223 bios, can someone send me the link

http://forum.techinferno.com/asus-gaming-notebook-forum/2538-%5Bg75vw%5D-modified-bios-vbios-higher-overclocking.html

I use intel 7260ac on 2,4 GHz and have the same problem. I tryed 2 different laptop and both have this issue. I tryed all intel drivers, but it no solved. In internet very much guys have the same problem with 7260ac.

thanks, I think I see what you mean now. Is there a reason as to why GPU boost is disabled though?

You need just to flash ultrabay card with modded bios too.

Atomizer

"The update.bat file runs the AFUDOS.exe with the particular BIOS ROM file, i.e. AFUDOS ms_gx740.rom /p /b /n with AFUDOS from a different BIOS folder should give me the right flash?"

Yes, that right.

Hello all,

I've just flashed with the 223 unlocked (overclocking addition) bios and it seems to be running great.

My keyboard lights have gone out, which is annoying, they were out at first and the function keys brought them back, but now they're out again.

I tried reading through the thread and following, best I could tell, the keyboard light fix was supposed to be included in the updated bios on the 1st page.

Any suggestions?

PS. Awesome work on this bios

Thanks,

Dmitriy

1. Extract the contents of the Fixmykb.rar file to your bootable USB flash drive. Once you have booted off the USB drive, simply type fixmykb and you should see a flash completion screen immediately. Remove the flash drive and power down the system.

2. Wait ten seconds and then power up the system and enter Windows. Once in Windows, turn on the lights with the switch button and you should have a backlit keyboard now, use FN+F4 to brighten the keyboard or FN+F3 to dim it.

3. Now just in case this did not work then reboot the system and wait until you are in Windows, press FN+F4 a couple of times and the keyboard should be backlit now.

4. If after all steps the lights are not working by now, please reinstall the ATK drivers again.

Write me PM.

This is pretty frustrating.

I have tried both og Klem´s uploaded bios and I am still only able to OC the ultrabay with 135MHZ...

My main card was flashed succesfully the fist time i tried but the ultrabay still eludes me.

I am sure I am doing everything correctly, can you guys see what the problem might be?

When you flashed videobios correctly you will see in the window Nvidia Inspector in right side of the number BIOS, inscription "modified".

@Klem Nice stuff, thanks! I was able to run the second GPU OC'd to 250MHz, but past that (at least in Bioshock Infinite benchmark) stuff crashes. I notice that voltages for my internal GPU run higher because of unlocked voltage offset, so I guess I would be able to push to +400MHz for second GPU if voltage was unlocked here too. Please unlock this or set it to +200mV like I have for my internal GPU!

Read my post #1490.

Hi

I can buy i7-3610QM for low price, but I am not sure if GE70 with i7 and i5 have this same mb.

I just want to be sure if it is the same situation as in PC, that I can change CPU without problems.

Actually I have got GE70 with i5.

MSI gave the same bios for i5/i7 version.

My GE70 was selling with i5-3210m (which I have bought), i5-3230m, i7-3610qm, i7-3630qm.

Yes, you can upgrade your GE70 from i5 to all model i7 (2 and 3 generation).

Klem and 750 for GPU please. I think there may present the same problem

Place here your screenshot GPU-Z and Nvidia Inspector from your ultrabay card after flashing mod bios.

Ok. This is mod with stock frequency.

Done. Try.

Voltage is locked, I cant change it.

Send to my mail or put here your videobios and i set this voltage for you.

Put the folder with this program and files directly on the drive C: and after running the command prompt, navigate to this folder (command cd), and only then starts the bat. If say short, you need to perform bat and other programs from your folders with them.

C:\Windows\system32

cd..

C:\Windows\

cd..

C:\

cd "name of your folder with files"

C:\name of your folder with files\backup.bat

Enter

Good luck!

Unfortunately, this is the most stable overclock I can get by only overclocking the core clock: http://i.imgur.com/mDxIRIz.jpg

My VDDC drops from 1.0370V to 1.0120V within a few minutes of running a heavy app/game. I can get +450 on the core clock while it stays at 1.0370V but it gives me a "display driver failed" error when it drops to 1.0120V. I got a beta EC that is supposed to help with overclocking from the msi forums but that didnt help as well. Is there any way to make it stay at 1.0370V ?

Just try to set 1,050V or 1,075V on core.