Jump to content

Dreckiger_Dan

Registered User
  • Posts

    5
  • Joined

  • Last visited

Posts posted by Dreckiger_Dan

  1. 30 minutes ago, Klem said:

    Doesn't matter, i have mistaken with file name, but mod vbios for your 970M, don't worry.

    ah okay, again thanks! Unfortunately I´m not able to download your file:

    "Sorry, there is a problem The page you are trying to access is not available for your account. Error code: 2C171/1"

    It seems I haven´t the permission to download anything so I must wait to get a promoted user...

    regards

    Daniel

    • Thumbs Up 1
  2. 1 hour ago, Dreckiger_Dan said:

    Hi Klem,

    thanks for fast response! =)

    I noticed this with Nvidia Inspector tool: when the GPU throttles it switched to  P8 State. This state ("energysafemode") is then active (135 mhZ) + voltage gets down.

    I wonder why the GPU switches to P8 state?! Maybe the GPU needs more voltage/power and can´t, so it throttles down. That´s why I asked for an OC VBios...

     

    The next question is: Does it make sense in my case to build a Vbios which always only have state 0 (Fullpower) ( + maybe fix the needed voltage) so that the GPU can´t throttle down?

     

    I attached my stock GPU Bios. (Clevo P 651SG / Schenker P505 Pro Nvidia Gtx 970m). thank you for the effort! :)

     

    Edited>

    Regards daniel

     

    StockBios_Clevo.rom

     

  3. 9 hours ago, Klem said:

    Hi!

    You can post here your stock vbios, from your card and then we can increase Power Limit and Power Target.

    Hi Klem,

    thanks for fast response! =)

    I noticed this with Nvidia Inspector tool: when the GPU "loses Power" / throttles it switched to  P8 State. This state ("energysafemode") is then active (135 mhZ) + voltage gets down.

    I wonder why the GPU switches to P8 state?! Maybe the GPU needs more voltage/power and can´t, so it throttles down. That´s why I asked for an OC VBios...

     

    The next question is: Does it make sense in my case to build a Vbios which always only have state 0 (Fullpower) ( + maybe fix the needed voltage) so that the GPU can´t throttle down?

     

    I attached my stock GPU Bios. (Clevo P 651SG / Schenker P505 Pro Nvidia Gtx 970m). thank you for the effort! :)

     

    Edited>

    Regards daniel

     

    StockBios_Clevo.rom

  4. Hey guys,

     

    first of all - great forum, nice to see people helping each other!

     

    I try to make it short:

     

    I think my clevo P651se (Schenker) is broken but I´m not sure...I must verify that - The reseller (Schenker) says Mainboard broke - I have to buy a new one or at least a new mainboard about 1000 € oO ..hits me hard.

    As I can see in Afterburner, when my 970m hits the power target, it goes down to 135mhz and stucks there. It seems the card needs more power?!

    I can´t believe that because sometimes I can play for about a half hour or longer. Temps are ok! (about 80 degree celcius)

    I just want to play with this laptop or at least verify if its really broken or not :( So I thought I try an OC-Bios with a higher Powerlimit/ optimized Vbios.

    this Forum is my last hope, everything else I tried (new windows, actually Vbios, windows settings etc.)

    Of course I would donate a amount, thats not the problem :)!

    If this is the wrong thread - pls forgive me, I´m new here.

    Hope you can help me...Regards

     

    daniel

×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.