xtreamcurbin

OK had a problem with writing vbios...gpuz would show the clock change but current clock would stay the same...same thing would happen when trying to change volts...so i decided to clean all video driver. Found nvidia drivers still in my sytem. Cleaned them and cleaned all ati drivers. Installed 12.10 drivers and an undervolt to 1.000v and everything is working great. Thanks svl7 for the vbios!!

Ok more info that seems weird to me...in ccc i disable power play and the clocks are 300/[email protected]. Power play enabled max performance 300/[email protected] and max battery life is 300/[email protected]. All info taken from msi kombuster at idle

Hey everyone, First post for me...i have an m15x. I recently installed windows 8, 920xm qs, and a week ago installed the 7970m dell card. Everything was good up until i put the gpu in. It runs but has a couple issues since the swap. First is the fan for the cpu is running at a constant 3000rpm(hwinfo). Sometime is just stays at that speed from start up and sometimes after a power drain itll operate normal then after a game when it cools down it sometimes goes back to being stuck at 3000. Next is memory clock most of the time gets stuck at 300mhz. When it is normal(after power drain) it drops mem and core while playing a game to 300mhz for a sec(msi & gpu-z) then goes back to normal. Any help would greatly be appreciated. Thanks Found out more info loggin...when everything is working good the gpu is running at 300core/[email protected](idle) and 850core/[email protected](gaming) . When it down clocks it goes to 450core/[email protected] for a sec or two. Today it was running fine playing diablo3 aside from the glitch and then all of a sudden it down clocked and stayed there till i restarted then it was fine. At the same time it is stuck at this lower clock, the cpu fan is running on high while temp is down to 45-48*, gpu goes down to 44* and stays there. Idle temp is 51*+/-5* and gaming it gets up to 80* playing d3 when it is working at normal clocks. As a side note hdmi does work, the cards audio doesnt work(i run audio threw idt audio), and native fan works