bavnotroclum

Posted March 27 Hi folks I am trying to do a project feels like a project for me -) with w100er - Windows7 , Intel 3632q, HD4000 , dGPU - 650m and eGPU 1050 - using EVGA 500b as a PSU.. I looked around in the last 3-4 days but I am stuck with error 43 sometimes error 10) . I installed Prema Bios just yesterday after some worries about ruining my good 11inch friend , but that gone well. I tried with couple of nvidia packages and on couple of occasions it get to the point of 1050 recognised as such but not starting - because of the error I presume. 1) I used safe mode / no network to deinstall the drivers using DDU 2) Then again in Safe Mode /no Network i used to install package and disable 650m graphics 3) I looked into Prema Bios but couldn't see any options of PCI enabling for hot swapping ...? I looked into the corecting the .info files of NVIdia installation but could,n make it up what exactly to write and read that if using Premas Bios could be avoided that step. I have tried to find a Bios for w110er with PCI unlocked but the last ones that I found and installed ( just for that reason ) Win7 v1.5 UV EDITION and OUV editions - did not have that options. I saw that BIOS for W230 probably have it but I am not sure could be used in any way /modification for my laptop. I managed to make recognised GTX 1050 and I eve tried to install 720.20 but couldnt despite trying with modified by e .inf files copied lines from 375.63 or 375.95 I saw on forum about success with 1050ti in similar manner - installed 372.20 and straight after that removing Register coded requirements for reboot - another later version Any advice which way to go ? I should decide if I am going to return the 1050 card and go for RX 480 or something else - I preferred Nvidia because I had a thought of using the internal monitor and looks less power hungry ( 1050 ) compared to 1060 /RX 470 Thanks

Hi folks I am trying to do a project feels like a project for me -) with w100er - Windows7 , Intel 3632q, HD4000 , dGPU - 650m and eGPU 1050 - using EVGA 500b as a PSU.. I looked around in the last 3-4 days but I am stuck with error 43 sometimes error 10) . I installed Prema Bios just yesterday after some worries about ruining my good 11inch friend , but that gone well. I tried with couple of nvidia packages and on couple of occasions it get to the point of 1050 recognised as such but not starting - because of the error I presume. 1) I used safe mode / no network to deinstall the drivers using DDU 2) Then again in Safe Mode /no Network i used to install package and disable 650m graphics 3) I looked into Prema Bios but couldn't see any options of PCI enabling for hot swapping ...? I looked into the corecting the .info files of NVIdia installation but could,n make it up what exactly to write and read that if using Premas Bios could be avoided that step. Any advice which way to go ? Thanks