So I've done all the steps and everything is working better, but still not quite right. I saw in an earlier post that the settings for the Ultrabay GPU should be Base Clock: -100Mhz Memory Clock: -300Mhz and Voltage Offset: -112.5Mhz. The problem I'm having is that on the Voltage Offset I can only go -50Mhz. Nvidia Inspector won't let me go any lower than that. However, on the primary GPU it will let me go that low. So it seems the default setting for the two GPU's is different. I have attached a screenshot of the default settings on the Ultrabay GPU in Inspector.