zane55

Hi guys, Has anybody tried flashing a VBIOS to a soldered 3GB GTX 970m GPU like I have in my MSI GS70? I want to flash, but don't know if it's possible, because I read the VBIOS is in the BIOS. Just want a lower voltage to reduce heat. Thanks

I'm just concerned, because I have a soldered GTX 970m no MXM Card. Also I didn't find any information about other user who tried flashing a soldered 970m

Ok will try this. Do you recommend flashing in windows with CMD or on bootable DOS Stick? I read the VGA must be deactivated first in device manager then flash under command prompt with nvflash.

Hey Klem, Can you please explain me shortly how to flash this mod? And what voltage did you set on the GPU? thanks EDIT: opened your bios.rom with maxwell editor. Just to be sure, can I just extract my VBIOS with GPUZ and open it with Maxwell Bios Editior, change my values and then save and flash it with NVflash under windows? Or do I need to note anything before? Is there any risk because the GPU is soldered on the Mainboard in GS70? I read something about VBIOS is included in BIOS and so it`s not possible to flash... is that right?

Is there something for an MSI GS70 2QE, too?

hi all, I have a MSI GS70 2QE with an i7 4710hq and gtx 970m 3GB. Can I use these bios / mods for my model or will I brick something? The Problem is, my standard voltage is to high (1.006) and the 970m keeps throttling at 87° down to ~850-900mhz, thats so frustrating . I want to undervolt my GPU and increase thermal and power limit. It would be great if someone can help me. Thanks

Can you please tell me more about this mod? What changes have been made? And is this file for the MSI GS70 2QE? Thank you

hi, I have a MSI GS70 with a GTX 970m. Unfortunately I have some problems with throttling CPU and GPU. I know the GS70 gets hot but my Model is just worse than normal. I can handle my i7 4710hq with Intel XTU, though it`s reaching over 90° on couple of cinebench runs. But my 970m makes me go crazy. I repasted several times but the GPU keeps getting over 87° and then throttles down to 924mhz. Even if the GPU Temperature is below 87° and I want to overclock, the voltage and clock rate automatically is reducing. So how can it be, My Notebook is in Temperature and Power Limit ?? For example in Far Cry 3 in a couple of minutes the GPU Temp is getting to 87° with fan on max speed. My GPU Voltage is higher than average I guess, it`s 1.006. So my question is, how can I bypass the Temp or Power Limit? I tried everything but without success. I have the latest drivers. Is there any possibility to undervolt my GPU or flash an unlocked VBIOS? Thank you for any help. Best Regards