seefew

Hi there If anyone from Germany is unsure to cope the Cable. I'm able to solder and to crimping wires, jacks and plugs for you. Feel free to PM me and we'll look what we can do. Greetings seefew

Please be patient. I have a few things to buy. But the markets are closed for holiday

the calculated value is anywhere between 15 & 20A for this diameter and length. A test run of 3h of rendering gives only minimal raising temps on the wires If i find time i´ll measue the real values.

@weecooper: Since nobody answered to my post #881 i´ve do it by t&e. What should is say, one step will work, the GTX660Ti is accesible. @All: There is also an other solution to get power into the enclosure if some tools (aka. soldering Iron, mini drilling machine) your friends, and you are willing to invest some work, . Here´s a little workaround In short: desoldered the barrel jack from the PCB make some solder points on the PCB desoldered the power connector form a Dell Optiplex GX620 solder the new power connector to the PCB solder two wires for to power the PCIe plugs of the GTX Plug in the jack from a Dell DA-2, power up the system, lean back and enjoy OMG, your warranty void if you do so , sh** happens, but it works quite fine for me little Impression: Once all my works finished i´ll illustrate and describe more detailed what i've done. Greetings

Maybe the following could be (or is) the reason why there is no 6P PCIe expansion canle included. It is not wise to get so much current over these JST connectors. Their max current is about 3A (<40 Watts). Due to the small contact surfaces there is the risk that the housing melts when you will pull more

Hi Community, maybe anybody can tell me: At a very past time, as i've worked with Windows (Mammuts rans at this time) there was one Driver package avail for all of the NVIDIA cards. My Question: Will each Webdriver work with each GPU? I have a GTX970@Acitio running as GPGPU with 10.10.2, additionaly i have a GTX660Ti AMP! My thinkings: Buy a second Acitio and use both daisy-chained Thanks forward seefew

may a silly question: will this script do the required changes in the 3 kexts if they´re untouched? Because i´ve do a clean install with Yosemite on my MBP i´ve to change these files, but i think it´s a better way to do this by this way. Regards

i´ll maybe give a review with all my works. stay tuned

Hi @All & Hi Dschijn, great to meet you here! As written on another Board you'll know i'm also in process for build an aitAc eGPU. Wondering what's aitAc means? Look at your first post all in the Akitio case Maybe you shoud do a Trademark for this name Regards