angel_grin
-
Posts
35 -
Joined
-
Last visited
Content Type
Profiles
Forums
Downloads
Posts posted by angel_grin
-
-
On 8/16/2017 at 2:06 AM, gerald said:
Hi everyone,
I just ordered the components for 50 adapters :-)
The production will last about 6-8 weeks. The cost for one adapter is €80,- and €20,- for int. shipping.
If you want to buy an adapter pls register at this doodle link.
https://doodle.com/poll/2i5difnygxcs4ibp
Thanks Gerald! looking forward to get my hands on one.
My laptop needs more graphics powa!
-
+1
Sent from my SM-G920I using Tapatalk -
On 03/12/2016 at 7:57 AM, fmj777 said:
Here is my solution to the fan control problem.
I was browsing on ebay looking for some sort of micro switch that I could hook up to the fan brown wire, so I could turn it on or off when needed, and I came across this temperature sensor/switch. They work like a thermostat, when reaching a certain temperature it will either turn on or off depending on the model.
You can choose from a range of temperatures, from like 45C to 130C. I'm using a normally closed, 70C model. Around 70C it will open the circuit and run the fan at full speed until the temperature drops down to around 65C. They are dirty cheap! I paid 99 cents each, including shipping.
Wire the sensor in series with the brown wire, place it as close as possible to the chip or heatpipe using thermal adhesive tape and you're done.
This is what it looks like
(I keep the wires tucked under the black sticker)
I glued the sensor with double sided thermal adhesive directly on the heatpipe.
There's not enough room on the ultrabay GPU to glue the sensor on the heatpipe, so I glued it right next to it. Worked just as well.
More pictures: http://imgur.com/a/DBlxV
This is the listing I ordered from: http://www.ebay.com/itm/331577233585
Search for "KSD9700". Make sure you choose the "Normally Closed" model.
Both GPUs are running at 1189MHZ and the memory is running at stock speeds.
GPU2 was repasted a couple months ago with Mastergel Maker from Cooler Master. CPU and main GPU still have the stock thermal paste.
"Idle" temperatures, watching a video, browsing the web (measured on a hot day).
CPU ~55C
GPU1 ~50C
GPU2 ~40C
Full load (GTAV, BF Remastered, MadMax). GPU2 will overheat and throttle using a GPU burner software like Furmark and OC Scanner. This never happens in any gaming session, regardless of how long I play.
CPU ~80C
GPU1 ~77C
GPU2 ~83C
@fmj777 bro, i did the sensor mod that you have posted, but my fan stopped working after. can you help me as to what have gone wrong? I've soldered the wires in series as your instructions and photos, I'm not sure if that's what caused it to stop working. did you solder yours or just wrapped them together? can you give advice as to what to do? thanks!
-
thanks, does it work with the internal screen? or do we need to hook it up to an external display?
Sent from my SM-G920I using Tapatalk
-
hey skavi. can you do a review once you have it up and running?
Sent from my SM-G920I using Tapatalk
-
can i request for a flexible version? im planning on turning may y410p into an all in one
Sent from my SM-G920I using Tapatalk -
any reviews from anyone who already has the adapter?
Sent from my SM-G920I using Tapatalk -
anyone upload video of the adaptor in action? im intetested as well
Sent from my SM-G920I using Tapatalk -
maybe this will shed some light on the nvidia cards?
- 1
-
subbed. would like to see pics btw.
-
You can order the extra ultrabat gpu from thailand. Its less than $100. Not sure about the shipping thou. Just google JIB thailand
Sent from my iPhone using Tapatalk
Did you buy from them?
Sent from my SM-G920I using Tapatalk
-
I got a GT750M5 and I can not even get into windows because of the "Unauthorized slave vga card is plugged in. power off and remove it" message. I am using the 3.08 BIOS version. Is there any way to baypass this message?
I think there is no solution. I bricked my y410p trying. Lol
Sent from my SM-G920I using Tapatalk
-
I'm planning on installing my Intel AC 7260 very soon. I've got a Lenovo Y410P on BIOS 3.05. There's so many posts in this thread...and I'm new. Will I be able to use this wifi card with my laptop?
You need the modded bios. I have the 7260 as well.
Sent from my SM-G920I using Tapatalk
-
Hi everyone, if anyone is kind enough to take a photo of the bios chips of the Y410p please do so. I just need the correct orientation of the chip because i need to replace my bios chip due to a bad flash. I already desoldered the old bios chips and forgot how the orientations were. If anyone can help me. Thanks!
-
bump
-
is it ok to remove the plastic covers in the motherboard?
-
is it ok to remove the plastic covering on the motherboard and the ultrabay gpu?
-
Hi. Did anyone attempted to solder new bios chip after bricking?
I have seen that some company is selling bios chips for our laptop. I am probably going to buy it. I havent bricked my laptop(jet) but just in case it happens I will have those chips.
BIOS Chip:LENOVO Ideapad Y510P (Dual chips) | eBay
I have also seen other seller but its for Y510, they look same but I dont know if they are actually same, as they come preprogrammed already.
Lenovo IdeaPad Y510 (15303) Bios-Chip24.com
Also I am looking forward to buy this programmer if the chip will be compatible. I contacted the seller that I want to make sure what is the part number for bios chip of our laptop. I am too lazy to dissasemble my laptop again to look what part number it is
SPI Flash Programmer WINBOND ST PMC MXIC ST SST ATMEL | eBay
Edit: It seems like chips in our laptop are Winbond 25Q32FV and Winbond 25Q16DV And they are pretty cheap to buy on aliexpress.com even if you buy them in bulk so in any case cost of chip plus programmer is cheaper rather than sending it to lenovo.
I ordered one of those chinese programmers. SP8-B SPI Programmer to be specific as it supports the chip we have in y510p and tommorow I am gonna order chips. I have to buy 10 of each but they are cheap. At least I have spare ones just in case.
hi may i know the status of your bios replacement?
-
found another one with the 4 pin but this is for the xbox 360.
Customised Speed Xbox 360 Slim FAN MOD Accelerator Controller | eBay
maybe we can contact the creator to make a fan mod specifically for our laptops y410p/ y510p series.
he has 100% positive reviews from ps4, ps3 and xbox users.
this is the sellers profile.
http://www.ebay.com.sg/usr/circuit5urgeon?_trksid=p2047675.l2559
its very easy to use just like an additional wire, no need to solder or cut anything.
what do you guys think?
but i think the xbox 360 fan mod will work for us because same connector, he just changed the PWM signal.
-
anyone tried this? its originally for the xbox but it has the same 4 pin connection. i think it can work. i contacted the seller if it is compatible with laptops.
Customised Speed Xbox 360 Slim Fan Mod Accelerator Controller | eBay
-
can we use this for the y4/510p?
particularly the xbox fan speed mod, or the ps4 fan speed mod.
http://stores.ebay.com/circuitsurgery?_trksid=p2047675.l2563
here is the one i like
Customised Speed Xbox 360 Slim Fan Mod Accelerator controller | eBay
and this with the manual control
PlayStation 3 Best Game Fan Mod PS3 EZ Chill Fat Slim Sony YLOD Heat Solution | eBay
-
hi guys, can this work in our lenovo y410p? its a mod for the ps3 originally.
PlayStation 3 Fan Speed Controller Booster YLOD Protection Mod PS3 EZ Chill | eBay
PlayStation 3 PS3 Fan Mod Speed Accelerator Controller Run Cooler Avoid YLOD | eBay
-
Ok i flashed the modded bios with vbios and wanna share my thoughts..
I APPRECIATED the modded bios with custom modded vbios so much..Thanks SVL7
but with new configurations after 3 hours benchmark testing i found the best stabil GPU and MEM clocks
+160mhz on core = 1218mhz
+400mhz mem over core = 2900mhz or 5800mhz
+37.5mV voltage
BEYOND above values gpu is getting tooo hot under %99 load in 5 minutes and breaks 90C and above..especially with a combination of cpu at the same time gpu is getting easily too hot..because the left side fan cools both cpu and gpu together...but there is something very ridiculos thing i dont understand from the beginning..there is a built in DUST REMOVER thing in energy management software..when you start it both fans getting reach their topspeed..but in real time working all hardware is getting too hot under fullstress, cpu is near 98-99C and GPU is 90C but both fans working minimum %50 slower than when using dust remover program ???? because they can work faster we see it in dust remover
Is there any way to get them work continuously in its FULLSPEED just like when in dust removing or is there any option in the modded bios or SVL7 could make a new EC firmware about this??
Try this, but its not perfect. IdeaFan for y510p'>http://forum.techinferno.com/showthread.php?t=7358
IdeaFan for y510p
- 2
-
BiosFixer 2.0 DOESNT WORK....! I decided to use your modded bios for y510p 750M SLI version..after successfully updated to bios 3.05 from 2.07 and took a backup of new 3.05 bios then
when I simply drag and drop bios backup file on BiosFixer_2.0.exe just a small windows pops out but there is neither a button nor a browse thing in there..? and when I close it nothing created in the same folder as it should be "v305mod.bin" just look at my picture uploaded..
and I also disconnected the second gpu from the bay but it doesn't work again
and I cant go back or downgrade to official 2.07 bios even though Bios Back Flash is ENABLED in bios and when I run this "Y510p-Y410p_v207_[stock].exe" with ADMIN priviligies says "Bios version compare error"... WT:Banane56: ?
[ATTACH=CONFIG]14511[/ATTACH]
you should drag the file bios.bin onto the small window. around the white area.
Y510p Ultrabay Graphics card
in Lenovo
Posted
where to order the adapter?