naldor

You can overclock without flashing an bios, and it will be stable(not responsible for any damage done to your system though), its limited though.

If some1 upload an R2 bios, or give me a link where to download it, I could take an look at it, but I think some1 already figured out how to fix it coz R2 has been around for a while. But as Brian says be more precize, what bios update when did it shut down, does it do anything when you power it on? Any lights, fans?

- - - Updated - - -

http://forums.extremeoverclocking.com/showthread.php?t=351421 is what I found on google you could give it a try

I am not sure undervolted could support the stock clocks stable, dont nkow if any1 tested yet?

Well as drastic as it was, it worked, and installing windows doesnt take that long tbh .

Still runing an 2920xm or already using the 3920xm?

@svl7 Since you are busy to tweak the GTX 680M VBIOS I decide to modify my GTX 670MX VBIOS by myself Read the thread from the first floor to the last one and finally I succeed! Very thanks for your contribution to the 680M VBIOS! See what I've done All based on my ALIENWARE M15x!

Stock Frequency: 600MHz/2800MHz and this one got 1006MHz/4010MHz!

[ATTACH=CONFIG]5701[/ATTACH]

Quick question you raised the voltage on the card?

@svl7 flashed to 1050v bios from the second post, and successfully achieved P8030 3D marks! (only upped core clock for starters) Thanks man I appreciate it! Temperatures are only around 68-70c in BF3 on ultra. Curious...is there more Vcore to be had? or is 1050v the limit? :-) Cheers

1.05v is already a big overvolt tbh, but if we'd go up to 1.075v or 1.1v u greatly increase the risk on destorying your card .

- - - Updated - - -

Plus the amount of heat will be stupid, no way you ccan play bf3 long on 1.1v.

It's the same chip but more shaders activated

They are lasercut I think?? So no way to turn an gtx680m chip(670) to an gtx 680mx(680), otherwise people already would have done that with those desktop cards(desktop community is way bigger).

HD 6990M is way faster

Hi naldor, the DELL 1.05v bios is stable @1045/2349 in the game? no throttling? what's the temperature?

hej

10

I am sorry I should have said I am using an clevo gtx680m, if you clock down to like 1023 its stable in game(skyrim,bf3,witcher played em all 3 houres straight with no problem).

update, temperature around 68-72 degrees, sometimes even lower

Well one could have done better, but I'm not going to start a fight

The 1025 Clevo vbios works great so far, stable and doesn't run much hotter.

Well, since my iphone 4 died and I am just a poor student I needed a new phone , will pick up an extreme processor later this year probably an 2920xm/2960xm for the upcomming m18x r1 I am buying (I can buy one extremely cheap , then will sell my R4(with equiping an gtx580m, and use that money to fund the 600 euro costing m18, and with the remaining money buy anohter gtx680m, and buy later this year an r2 motherboard when they get cheaper ))

I think the eurocom card is a way better overclocker then the dell, or that must have changed by now?

Sold my 3920 xm(qs) to get myself an iphone 5, so back on my 3610qm now, got NVIDIA GeForce GTX 680M video card benchmark result - Intel Core i7-3610QM Processor,Alienware M17xR4 score: P7984 3DMarks with 1045/2349 my memory cnat go higher, coz it will make it crash

- - - Updated - - -

using 1.05v bios

- - - Updated - - -

Could upload the log if interested?from hwinfio

Omega I suggest repasting, you shouldnt get near those temperatures. Wait with modding, and first try the repasting. GL!

- - - Updated - - -

Omega I suggest repasting, you shouldnt get near those temperatures. Wait with modding, and first try the repasting. GL!

You replaced the memory chips? Could you make pictures of that

3000 on memory is impossible, , plus overvolt doesnt count for the memory but only for the processor, if u want to increase the voltage on the ram u need a hadware mode i think

Hej SVL, what happend to the MSI/Clevo OV bioses , just got back from university, but last time I check here(like august), there were both OV bioses, what happend to them? Not stable enough? Thanks in advance!!!!

Hej, I am back from uni so got time for this again, but I was wondering where the MSI/clevo OV bioses are? I would love to test an 1.025 or 1.05v bios for my clevo card, thanks in advance!!!!!!!

I heard there are some ES bioses which dont have these kind of throtteling, but they seem to have other problems, not sure though

Well, its either clevo or MSI, so the vbios should work with no problem.

- - - Updated - - -

ow and its probably not possible for you to download the file coz you need 5 posts

Yea its really an InsydelH20 bios. Its actually the 1st time I've even heard of this type of bios, so I'm not sure how to dump it. There is a hidden partition on the hard drive, so I'm going to try to unhide it and hopefully it will have a copy of the bios on it. If not, do you happen to know how to dump it?

Well, you want to mess with advanced bios settings, and you dont even know where the bios is(definitly not on the hard disk ), I think you should watch out, coz some unlocked options could damage your machine , but if you want me to help you dump it, pm me

Its not a bad idea to flash the dell bios on your clevo card, its a great idea if you like to brick your card , so its a no go

Interesting stuff, sometimes makes me regret I decided to go for econometrics , might pick a minor electronics engineer, since I still need to do a minor

I wouldnt suggest flashing in windows unless you like to brick your card on purpose.

the cpu price is nice, but you will NOT find an gtx680m for tha tprice m8