DR650SE

Same thing happened to me when I was in Iraq. I had an external and ot flickered at every little thing. Like scrolling web pages. One of the reasons I always kept it at stock clocks. Don't have an external since O got back

Hmm... In this case will be sending a PM as well to test it. Interested in how it performs compared to the other ICDiamond stuff.

Hmm, thats odd, your card may be going bad. Have you recently changed drivers? Try reinstalling drivers and re run vantage GPU tests and see if that helps. If not than I would give dell a call and push for some GPU replacements.

Thow up a GPU-Z screen shot. Must have looked like a slide show, I don't kow how you let it finish! lol

Lol what can i say, Im a die hard R2 gangsta lol

Yea just my luck that i have one bad card from each set. What happened was a that i think when I put up the 5870 some moisture was on my hand. Probably from eating a popsicle. Lol. Anyway ot was on the corner of the card. Cause enough corrosion to eat some solder and kill the card. At least Dell will replace that. My fear is that since I've already had a mobo replacement and two gpu replacements they will push me for an M18x which I don't really want. I want to continue benching the M17x R2. For the 6970s issue, Pkhetan is on it and working on an RMA. If I can keep the gpu at 24k and push the cpu to 22k. I think i can get a 24k overall score. If I can get a modded bios I think i can even get 25k with a 330w psu.

Looks like I may have to RMA one of my cards. It's giving me BSOD, and anytime it hits the 3D Clocks now it auto shuts down the computer as if I yanked the power cord. Tested it in both slots. X-Fire it results in a BSOD since it's the slave card, when put in the master slot it auto shuts down. It has been running sketchy for a few days. To make matters worse, when I stored the 5870s, it looks like one card had gotten some sort of condensation on the corner which ate some solder. Now it beeps and gives me the GPU signal on the scroll/caps flashing at boot. *sign* looks like I'm going single carded for a while. At least I was able to squeeze the last bench run out of it, and was able to keep the CPU score a little higher. Had I used some Dice I think I could have hit the 24K overall mark. At least I was able to squeeze this out between issues. I prepped the system and put a little dice on it, but only made it though one run. Maybe once I get the RMA (6970s), and replacements from dell (for the 5870s) I'll be up and running full speed. Things looked so promising. 3DMark Vantage: 23405 GPU: 24381 CPU: 20896 http://img231.imageshack.us/img231/9273/23405.jpg

Mobo i under warranty. Though it would be interesting to see if they replace it after my mobo burned down. I swear, it was an accident! thats why I have accidental damage!

Very true, as long as it doesn't damage my GPU's, I should be good on everything else

I know! I'd easily be in the upper 23K-24K overall vantage score if I could push harder. I've scored 23K CPU on Vantage numerous times, and the GPU's could easily score 25K. Once I get moved out to VA, I'm going to get with TheWiz, and see if we can't remove the bios PSU check. If that works out, better believe I will be picking up a 330W.

So this is still going on? If so once I get my new mailing address, i'd be interested in trying it out, and testing it. We all know I like to heat up some thermal paste

Heres what I've been able to do thus far with 6970 X-Fire. Havn't been able to even come close to the GPU capabilities due to the PSU limits. But well see what I can do when I get more time. 3DMark Vantage: P 22724 GPU: 24438 CPU: 18823 3DMark11: P 7234

Here are some posts I made at NBR, easier to copy and paste, but these are my prelim benches on the 6970s in the R2. Here is a stock GPU clock run that I did last night. I havn't gotten around to overclocking till I can get the cards flashed. I'll probably have to do them one by one in the master slot with winflash first, then I should be able to through atiflash in dos. But here it is. Only thing I changed was put the CPU TDP at 74W. Vantage: 20593 CPU: 17538 GPU: 21862 Stock GPU Clocks. 3DMark11: 6400 Stock GPU clocks, CPU at 140MHz FSB with a 74w TDP.

Hmm, may have to bench with 11.6 now...

There should be some interesting updates to this thread in the next few weeks. I've put in an order for two 6970's for my R2. We'll see just how far they can be pushed, I'd like to think the that would make an XM CPU based R2 capable of going head to head with an M18x. I'm sure still ths scores would not reach M18x capabilities, but it'll be interesting none the less. The one thing I have on my side is the more overclockable CPU. There are no time limits, still I don't think this will affect 3D based benchmarks.

I voted 11.5. Does 11.5 show improvements over 11.4 enough to make a differance? If so I might take one of my days off for some good ole R2 benching if I can throw a few points on top of my top scores. Not going to be able to hold a candle to the Avenger, but still might be some good fun. If I remember right I was close to 22K on Vantage on the R2. Not sure if 11.5 would be able to make up for the +/- 300pts I was from 22K. But I'd definately like to see the review based on the most recent drivers, since that is what most people will be interested. Especially if it maximizes performance at stock clocks. Thats what the Aleinware crowd would want. IMHO anyhow. Either way, looking forward to the review. An 18xR2 may be in my future. Especially since from the ORB Futuremark benches, the site lists the mobo as 18xR1, I figure an R2 is sure to come down the line. Ok I'm ranting, enough beer for me. 11.5!

Like on gas? Here it jumped from $3.70 straight to $4.15. Nothing in between. 10:30 am it jumped two days ago. /rant Given the 18x price tag, Id be interested on thier launch sales. I just want to see the bios

Hmm. I may call soon. Just ran WEI for the heck of it and it hosed my display drivers and now upon boot its giving me a bsod "registry error" without a few sec of the desktop. I can re image and that would probably fix it. Problem is its on my 940 and i bought with a 520m. Still May push it though. I think the 940 is good though. Just needs extra voltage if I use TS. Thanks Brian, May be calling mid May

Hmm, not sure whats going on, but in the last few days I've had two BSODs. Thats with the CPU Vcore at +75mv. If it persists, I may try and just get a replacement. At this point I've had two GPU replacements, a mobo replacement, and the touch strip/ribbon replaced. I'm also too lazy to trouble shoot it. Maybe I'll try for a credit towards the M18x, but I'd hate to see the RGB/19x12 go Those are two things i'm attached to. Maybe I'll just wait for the R2 to become unavailable in the outlet before I go that route BSOD was right after coming out of Unreal Tournament 3. I was just running it real quick to get an idea of GPU temps, since I've noticed CPU temps have been up since the weather has warmed up which I expected, but in the few min I played, HWInfo32 reported a max of 87*C on the CPU. May have to eventually turn on the A/C Whats the ETA on the M18x anyway?

Haha, yea it is, I used it to stop the Dice cup (Koolance V2) from sliding on the CPU die. the computer was still at a slight angle and I couldn't find anything to get it perfectly level. Closest thing to keep it level was a few of my fiances chick flicks hahaha. Plus I was kinda crammed for time It's an old one as you can see a brown hole in it, I think from a burn lol.

NBR Copy and paste = i7 920XM (ES) wPrime 32M @ 4.002MHz: 6.275 sec wPrime 1024M @ 4002.3 MHz: 192.72 sec For some reason two cores remained at low temps, and the other two went as high as 44*C. Maybe I'll mess with it later. Cant get the mobile chips as cold as desktop chips because the cold bug real easy. At Idle, throttle stop would read as low as -20*C, though I'm sure the chips temps were even lower. Maybe the pot wasn't sitting quite right. But it's made for a desktop mobo, so I couldn't bolt it down. I think thats the end of the line for that chip unless I can get some more voltage @MW, Sorry to hear your sistem is KIA, At least your getting the 18x, I may upgrade, depends on what the costs are and what I can get for my 17x. Doubtful though lol, though I'd love to bench the 18x, only if it's as OC friendly as the 17x R2.

Yea, didn't have any issues, but actually the rag was to hold the dry ice in place. It tended to slide since I didn't have it at a perfecly flat angle, but i definately helped cool the componets. Tommorrow I may try with my dice pot and see how that works out. Don't xpect too bug a diff, since I think voltage is my limit now. But we'll see. If I can make time

With all the benchmarking, I had kinda forgot what the stock scores were. Guess that's the score that matters. I never have the system OCed when i game. Well except TS.

IN your opinion, which do you perfer, the M17x monitor or the Dell? I'm also looking to get an external soon and this looks like it may be a decet choice.

To me this makes no sense at all. Since USB 3.0 is backward compatible with USB 2.0 hardware, what sense does it make to put limitations on the hardware??? This has me stumped and I hope it doesn't reflect the type of thinking that went into the overall design of the system.