
Turbosheild
Registered User-
Posts
5 -
Joined
-
Last visited
About Turbosheild
- Birthday 06/24/1995
Profile Information
-
Occupation
Student
Turbosheild's Achievements

Curious Beginner (1/7)
10
Reputation
-
I am dabbling in overclocking, and I am reaching the maximum of what my 180w Power brick can provide. My internal components are i7-3720, GTX 680M, Samsung 840EVO, 750GB Momentus HDD I have searched, and cannot seem to find any power bricks above 180w. So, I am curious in regards to the possibility of splicing a higher wattage (220w?) PSU to the plug of my current 180w, 1) if this is even feasible, and 2) If this is a terrible idea than could cause damage to my laptop. Additionally, I would be greatly appreciative if anybody knows about a source for power supplies that run in the range of 220+ watts, and would be willing to share the aforementioned source with me. _________________________________________________________________________________________________ Additionally, if anybody has done any aftermarket modifications to their GT70 to improve cooling performance, or any laptop for that matter, I would love to see, as I am hoping to do something of the sort to my laptop as well. Any and all help would be greatly appreciated. -Emma
- 3 replies
-
- laptop
- laptop cooling mod
-
(and 3 more)
Tagged with:
-
I am dabbling in overclocking, and I am reaching the maximum of what my 180w Power brick can provide. My internal components are i7-3720, GTX 680M, Samsung 840EVO, 750GB Momentus HDD I have searched, and cannot seem to find any power bricks above 180w. So, I am curious in regards to the possibility of splicing a higher wattage (220w?) PSU to the plug of my current 180w, 1) if this is even feasible, and 2) If this is a terrible idea than could cause damage to my laptop. Additionally, I would be greatly appreciative if anybody knows about a source for power supplies that run in the range of 220+ watts, and would be willing to share the aforementioned source with me. _________________________________________________________________________________________________ Additionally, if anybody has done any aftermarket modifications to their GT70 to improve cooling performance, or any laptop for that matter, I would love to see, as I am hoping to do something of the sort to my laptop as well. Any and all help would be greatly appreciated. -Emma
-
Hi! So, I am new here, and I was hoping that I could get some advice regarding flashing the vBios of my GTX 680M, residing within my GT70 (Valkyrie CZ-17, from iBuyPower). As time have progressed, what was once a cutting edge graphics chip is now struggling to retain the flair it once held, and I with to restore it to its former glory, ie) squeeze every ounce of performance that I can out of this card. This being said, while I have a basic-intermediate knowledge of overclocking, I am entirely new to the concept of flashing a vBios, and thus I am a bit apprehensive as the last thing that I want to do is fuck up a $600 graphics card. I currently run a moderate overclock of 800 MHz, and 2000 MHz on the memory, using the stock vBios. My goal is to achieve a base clock of 900+ MHz, perhaps even 1000ish with a sudo-boost of sorts, if that is possible. I have an MSI GeForce GTX680M (4GB) Running - GeForce 335.23 WHQL - as a driver. The current BIOS is - 80.04.33.00.24 And the GPU is (obviously) a GK104, revision A2. I have been looking through the forums, and found what I thought to be a good BIOS, but it said that I didn't have access to the download, and all that I can find now is a vBIOS for a Clevo 4GB 680, and I have an MSI 4GB 680, so I worry of the consequences of using a such a combination of soft and hardware. __________________________________________________ __________________________ Additionally, I have a question in regards to managing the thermals in this laptop. I currently have two external solutions, one moderately priced cooling pad with a 92mm fan, and a Jerry-rigged solution with a 10" desk fan that can successfully keep the laptop below 68C (stock clocks), with an ambient temp of ~20C. So, my question regarding cooling, are there any internal modifications that can be done to increase the potency of the internal fan, if the internal fan can be upgraded for a more effective model, or if there are any software tricks to turn the fan up to 11, metaphorically speaking. Any and all help would be greatly appreciated. -Emma (Seriously, I would really appreciate some advice here)
-
I recently replaced my 2 year old stock paste with MX-4 and there was a notable difference, of between 2C-6C (maybe even 8C at high load).
-
Hi! So, I am new here, and I was hoping that I could get some advice regarding flashing the vBios of my GTX 680M, residing within my GT70 (Valkyrie CZ-17, from iBuyPower). As time have progressed, what was once a cutting edge graphics chip is now struggling to retain the flair it once held, and I with to restore it to its former glory, ie) squeeze every ounce of performance that I can out of this card. This being said, while I have a basic-intermediate knowledge of overclocking, I am entirely new to the concept of flashing a vBios, and thus I am a bit apprehensive as the last thing that I want to do is fuck up a $600 graphics card. I currently run a moderate overclock of 800 MHz, and 2000 MHz on the memory, using the stock vBios. My goal is to achieve a base clock of 900+ MHz, perhaps even 1000ish with a sudo-boost of sorts, if that is possible. I have an MSI GeForce GTX680M (4GB) Running - GeForce 335.23 WHQL - as a driver. The current BIOS is - 80.04.33.00.24 And the GPU is (obviously) a GK104, revision A2. I have been looking through the forums, and found what I thought to be a good BIOS, but it said that I didn't have access to the download, and all that I can find now is a vBIOS for a Clevo 4GB 680, and I have an MSI 4GB 680, so I worry of the consequences of using a such a combination of soft and hardware. ____________________________________________________________________________ Additionally, I have a question in regards to managing the thermals in this laptop. I currently have two external solutions, one moderately priced cooling pad with a 92mm fan, and a Jerry-rigged solution with a 10" desk fan that can successfully keep the laptop below 68C (stock clocks), with an ambient temp of ~20C. So, my question regarding cooling, are there any internal modifications that can be done to increase the potency of the internal fan, if the internal fan can be upgraded for a more effective model, or if there are any software tricks to turn the fan up to 11, metaphorically speaking. Any and all help would be greatly appreciated. -Emma (Seriously, I would really appreciate some advice here)