Hi,
first off all, big thanks for this great work, this BIOS is really great
But maybe you can help me with a problem. I have a 2-way Titan SLI which runs fine with Stock BIOS OCed at 1163 MHz with 1,212V and 106% Powertarget (done with Precision X). One notch more an it doesn't run stable anymore. With Aircooling I was at 74°C at this point, so I expected to have reached the Power Target since there was enough room at temp target. The Memory runs at Stock clock. If I do the slightest overclocking of the memory it won't run stable anymore at 1163 MHz GPU (which is stable without Mem OC). Another hint that I have reached the Power target. Ok, as far as good...now the next step
Then I applied this great BIOS, which have may advantages for my setup, but the cards are still behaving the same. This point I don't quite understand because I should have much more room for OC now because of the increased Power Target in this BIOS (if not at the GPU, so at least at the Memory I thought). That seems strange to me and I was not expecting this.
Then I applied Watercooling, now the Cards ran with the same settings at 40°C...but the cards are still behaving exact the same as before. With a greater Power Target I should be able to do some Memory OC, even if the GPU were at its limit. But this isn't the case. If I put down the GPU clock, I can do some Memory OC (again a hint for a Power Target Problem).
Can somebody give me an explanation for this observations, maybe I overlooked an important point. Or misunderstood something
I have verified, that both cards are correctly flashed with the modded BIOS and I use the 320.49 Driver atm.
It would be great if sombody has an idea, why my cards dont want to move just a little step farther, even with watercoolung and 350W Power Target.
Thanks in advance.