invait53

I don't have wi-fi router 1.73Gbps to check that. I did that upgrade because of bluetooth. For that mod I used the broken needle file and manual bench vice. Now wi-fi + bluetooth work very well, without lags or disconnections.

Hello everybody. I install the Dual Band Wireless-AC 9260NGW NGFF 1.73Gbps 802.11ac WiFi Card+Bluetooth 5.0. It works perfect. My previous card was BCM94360HMB but bluetooth was working very bad. If I connected Bluetooth speakers or headphones it always lagging or disconnecting. I bought the NGFF to Mini PCI-E Adapter and 9260NGW card. I cut the fastening on one side by a needle file.

I updated to 1903 too and webcamera doesn't work well. The picture of the camera isn't colored. Can you check that? The problem is solved. I installed the old driver sp66054 HP Universal Camera Driver v5.00. But anyway the camera with Skype doesn't work.

You are right

LG Display LP125WH2-SLT3 General Features Response time 35 ms.

But recponse time 35 ms? I'm thinking about AOU B125XW01 V.0 40 pin slim, response time is 6 ms.

They tried to do it many years ago. I fink they didn't find the IPS display at that time.

What kind of IPS? The B125XW02 V0 isn't IPS, it's TFT-LCD.

Hello, if you found any information how to change the matrix success, pls, share it with us. I would like to try that too. Sorry, didn't notice link.

Hi. You didn't read well the first page. Guys already tried. Not success:

@Onoakino Sorry, I wasn't here long time. I just want notice that the stock bluetooth socket isn't in white list in bios.

Hi, @Onoakino 1) I have router ZyXEL Keenetic Giga III: Link speed (Receive/Transmit): 1300/866 (Mbps) Network name: Keenetic-6550-5G 2) Yes, bluetooth 4.0 works well. But you must do the mod. P.S. I'm planning to go to the Philippines on January 2019. Hope see you there.

The newest wifi card is AzureWave AW-CB160H Broadcom BCM94360HMB 802.11AC 1300Mbps Wireless WIFI WLAN Bluetooth 4.0 Mini PCI-E Card.

Yes, it will not work with wwan and wlan. It will work with SSD only.

It's impossible because in dvd-rom bay use SATA (SATA_RXn, SATA_RXp, SATA_TXn, SATA_TXp) . Wwan card use PCI Express (PETp0, PETn0, PERp0, PERn0).

Yes, you can bay travel adapter HP. Here for example: Ebay I use the 90W adapter. Your processor is i7 3612QM and you can bay 65W adapter. But my advice is 90W adapter.

You just didn't search well. Several members use a BCM94352HMB. I use the BCM94352HMB wifi+BT4.0 too.

@batyanko, this +5 v is just for two USB beside.

I cut off cable from bluetooth module and soldered cable with USB to Sata adaptor. But bluetooth module has 3.3 V only and I took 5 V from motherboard. The bluetooth cable has the same color of wires like a USB to Sata adaptor. A first time I used the HDD Samsung 9.5 mm thickness but it was very difficult to set into laptop and I was afraid to broke something. I bought HDD 2 Tb Seagate Mobile ST2000LM007 7 mm thickness.

Hello guys. I decided to explain my mod about how to install two HDD and one SSD into our laptop. You can also use two SSD to make RAID-0 and one HDD as file's archive. You need several things to do this mod. 1. Caddy box made from plastic. 2. Sata to mSata adaptor. 3. Slimline 13 pin SATA Male to 22 Pin SATA Female Cable Adapter. 4. USB 2.0 to SATA 7+15 Pin 22Pin adapter cable for 2.5 HDD. But must notice that I use the Bluetooth USB port to connect a HDD to motherboard. My previous mod is wiring the WLAN USB pins to the docking connector to enable WLAN Bluetooth and I no need a stock bluetooth. Take the caddy box and move off everything from plastic. Cut the plastic box like on the photo and cut off all of webbings inside of the box. Before a wanted to use the Slimline 13 pin SATA Male to 22 Pin SATA Female Cable Adapter wholly, but it was impossibly to install into caddy box. The place is not enough. I just cut the cable and soldered it to mSata adaptor. I soldered off the connector 22 Pin SATA from mSata adaptor too. I used a schematic below: You need use countersunk screws to fasten HDD, mSata adaptor and Slimline connector.

@todo1 I can add that the i7-3632qm (35W) doesn't work with 1800 RAM too. Yeah, the choice i7-3632qm+1600 RAM is match more better.

@egpuer, I bought 4-cores processor three years ago and don't remember what bios I had but now the bios is F.63. I use 90w power adaptor.

@todo1 I have 2133 ram. Motherboard is 685404-601, rev:4.23

@todo1 Check the revision of the motherboard. Mine is rev:4.23. On the same place, under RAM. Sorry I'm not home now and can't check the laptop of my friend. I'll be home in the end of September and try to install 2133 ram. Now there is 1800 ram. Maybe it's matter. Can somebody who has 2133 ram or any and 4-cores processor to write here number of the motherboar and revision? We don't have any statistics of it. I've find: 685404-001 System board (motherboard) - Features the Intel QM77 chipset and HD Graphics 4000 integrated UMA graphics - Includes replacement thermal material - For use in models equipped with Windows 7 (Not for use in China or Ukraine). 685404-501 System board (motherboard) - Features the Intel QM77 chipset and HD Graphics 4000 integrated UMA graphics - Includes replacement thermal material - For use in models equipped with Windows 8 Standart Edition (Not for use in China or Ukraine). 685404-601 System board (motherboard) - Features the Intel QM77 chipset and HD Graphics 4000 integrated UMA graphics - Includes replacement thermal material - For use in models equipped with Windows 8 (Not for use in China or Ukraine). When I bought the laptop there was two disks with Windows 7 and Windows 8.