NVIDIA 436.02 Game Ready Driver: Freestyle Sharpen Filter (NEW) vs AMD RIS/CAS Video Comparison
By
Brian, in Software News
-
Similar Content
-
By svl7
NVIDIA 'Maxwell' VBIOS mods
Here you find modified VBIOS versions for the mobile parts of the Nvidia 'Maxwell' series.
The VBIOS versions in this post are tweaked for performance and versatility. You'll get almost complete control over the performance parameters of your GPU.
List of available VBIOS mods:
Nvidia GTX 970m - 'OC edition' rev0 - >> 6 GB Version << - modified by @johnksss & svl7 -> see attachments Nvidia GTX 980m - 'OC edition' rev0 - >> 8 GB Version << - modified by @johnksss & svl7 -> see attachments
Screenshot demonstrating the capabilities of the 970m versions:
>> Read the instructions carefully before flashing! <<
If anything is unclear after reading or if you have additional remarks, please post in the thread.
Flashing:
- Go to the device manager -> 'Display Adapters' -> chooser your GPU, right click on it and choose disable
- Flash the VBIOS with mnvflash, a modified version of nvflash (see attachments). Here are detailed instructions for nvflash in case you aren't familiar with it.
- After the flashing is done: Enable the GPU once again in the device manager.
- Reboot
Do NOT use driver 347.09, it's broken and useless and won't allow you to overclock, even with the stock firmware.
Don't distribute the files hosted here outside of Tech|Inferno. Don't modify the files you download here.
Donation link in case you want to buy me a beer
Thanks and cheers! -
By Binarious
I installed an NVIDIA Quadro P4000 Max-Q in a Clevo P750DM-G.
Device manager hardware ID shows:
PCI\VEN_10DE&DEV_1BB7&SUBSYS_75021558&REV_A1
I have done the standard inf file mod, then disabled driver enforcement as I have done successfully in the past, but it's not working this time. The install starts, then fails less than half way through. I have tried the DCH version, standard version, and studio versions and none of them will work. I am probably missing something. Could it be the result of the vBIOS?
Below are screenshots starting with GPUz
-
By Hax
I have tried to update nvidia drivers of my notebook ge72vr6rf apache pro. The only drivers that works are the ones provided by the msi. The problem is that they haven't updated those since 2016 and I can't play newer games.
Some say you need to mod your 1060 drivers, which I have no idea how to some says you need to update the flags in ini files. So please help me
Thanks for your time.
-
By depmixels
hello everyone, I have a MSI GT683R with a dying (pretty much dead actually) GTX560M in it.
I am looking to upgrade it to a new GPU, I have found a AMD Firepro M6100. (I first wanted to upgrade to a GTX970M, but that's too expensive for now... and corona is also making things difficult) I have already ordered a second heatsink to modify because I didn't want to modify the original heatsink it came with.
But, my question is. Does it even work in this system? I have heard of people getting it to work in the barebone variant of this system. But I am not sure if it would work in the 'fully loaded' variant.
Also, my games are mostly RAM/CPU dependent and I am looking for a little extra power in this system. I have found a I7-2860qm and I want to upgrade to 32GB of RAM, is it possible on this system? the sticker says 'max. 16GB of RAM' But I have feeling it says that due to the limitation of the cpu that's already on this system (I7-2630QM, 16GB RAM max.)
-
By Brian
Following the release of NVIDIAs new 436.02 driver which I mentioned in an earlier article here, I've decided to make a quick and dirty video showing off NVIDIAs new Sharpen filter which is part of their Game Filter feature. It works with the most popular APIs including DX 9, 11, 12 and Vulkan and can be set on a per-game basis with granular settings of 0-100 unlike AMDs RIS which is limited to Navi and lacks DX 11 support.
-