Jump to content
EwinRacing Flash Series Gaming Chairs
  • NVIDIA 436.02 Driver Release: Integer Scaling, Ultra Low Latency Mode, Freestyle Sharpen, Performance Improvements


    Brian

    Well that didn't take long for NVIDIA to respond to Navi. The new 436.02 Game Ready Driver adds the following features:

    Game Ready

    • Provides increased performance and the optimal gaming experience for Apex Legends, Battlefield V, Forza Horizon 4, Strange Brigade, and World War Z


    Gaming Technology

    • Adds Beta support for GPU Integer Scaling
    • Adds Beta support for Ultra-Low Latency Mode
    • Adds support for new Freestyle Sharpen Filter
    • Adds support for new G-SYNC compatible monitors

    Driver release notes: https://us.download.nvidia.com/Windows/436.02/436.02-win10-win8-win7-release-notes.pdf
    jpg.jpg

    This isn't the old max pre-rendered frames setting, its supposedly a new improved algorithm that matches AMDs anti-lag feature for Navi.

    Next up is support for integer scaling which Intel recently announced but it seems NVIDIA beat everyone to the punch. Unfortunately, this is only for Turing for now:
    jpg.jpg

    Additionally NVIDIA has created a new filter for FreeStyle simply called "Sharpen" which improves performance and visual clarity that is supposed to be on par with RSI but with much broader support and granular adjustment. According to Eurogamer, "They also point out that the amount of sharpening can be adjusted from 0 to 100 per cent, applied on a per-game basis and works with games across all major graphics APIs: DX9, DX11, DX12 and Vulkan".
    jpg.jpg

    Finally, the driver brings with it some game performance improvement, including very popular titles like Apex Legends which sees up to 23% boost at 1080p:

    jpg.jpg

    Overall a pretty solid release, it had some issues earlier when it was released with GeForce Experience being force installed but it should be remedied by now.

    Edited by Brian

    • Thumbs Up 1
      Report Article


    User Feedback


    2 hours ago, Dr. AMK said:

    Do you recommend updating to this driver for all older GPU's like the GTX 9xx/m, 10xx and the RTX?

     

    Yes although Kepler notebook support is discontinued w/this driver release unfortunately. However Maxwell/Pascal/Turing do well with this driver and I'd recommend upgrading. Integer support is currently only for Turing but I'm hoping NVIDIA makes it available to Maxwell/Pascal once it's out of beta.

    Share this comment


    Link to comment
    Share on other sites
    On 8/21/2019 at 7:00 AM, Brian said:

     

    Yes although Kepler notebook support is discontinued w/this driver release unfortunately. However Maxwell/Pascal/Turing do well with this driver and I'd recommend upgrading. Integer support is currently only for Turing but I'm hoping NVIDIA makes it available to Maxwell/Pascal once it's out of beta.

     

    I'm also hoping that nvidia will make the integer scaling available to the older Cards.

    Share this comment


    Link to comment
    Share on other sites

    Yeah I dont know how integer scaling is a turing feature when the hardware demand is going to be minimal considering the exact content its going to be used for.

    it should(theoretically) be easily implemented in maxwell/pascal cards

    Share this comment


    Link to comment
    Share on other sites


    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


  • Similar Content

    • By IveGotRoot
      I have recently upgraded my laptop(an M6800 firepro 6100) and replaced it with an GTX 980m. Nvidia says that the latest driver(461) supports my card but i can only install up to 388.13 Ive tried to mod it but i can't figure it out. I can run the latest linux driver tho
    • By Freddyicy
      I have spent a little time in the past few days looking around this site. I would love for someone to point me in the right direction to a forum that has information that could help me out with my problem.
       
      I have a:
       
      Alienware M17XR3 
      Windows 7 Home Premium 64-bit
      Intel I7-2820QM 2.3
      Bios InsydeH20 Version 1.0 A12
      NVIDIA GeForce GTX 460M
      (4x) 4 GB Ram
      samsung 2.5" 256 SSD (SATA3.0Gbps)
       
      It has been an amazing machine for the last 10+ years. Minor issues, nothing that an Alien Respawn could not fix, till now! On battery power it works just perfect.  Then I plug it in and it's all OK until I try to do anything, and then the screen goes white. The screen sometimes goes yellow, sometimes blue, but mostly white screen. It will do nothing until I do a hard reset (holding the power button till it turns off and turn it back on) with the power unplugged.  If the power is not unplugged then it will go through boot up to windows swirling dots then go white again. If I plug it in and do nothing I can charge it, unplug and continue what i was doing. I have tried a lot of solutions bouncing around the internet, and thought I was having a DC Jack connection issue (replaced the ac/dc power adapter, then the motherboard). I get a better connection now but with the same white screen result. I stumbled into this forum and I'm hoping to find solutions to my issues.  Then upgrade like so many others have.
       
      Any ideas, comments or suggestions welcome.
       
      Thank you in advance!
       
    • By Qvixot
      Hello everyone! First of all sorry if this isn't the correct forum to post this.
      I bought a laptop few days ago. The laptop is Sager P150EM.
      Cpu:i7 3610qm 
      Gpu: amd hd 7970m
      Ram: 8gb
      Os: windows 8.1 pro
      So my problem is that everytime i install the amd driver after the intel driver my laptop freezes or gets a bsod or something that stops it from working. Any help would be appreciated. I saw somewhere something about vbios does this matter anywhere?
    • By svl7
      NVIDIA 'Maxwell' VBIOS mods
       
       
      Here you find modified VBIOS versions for the mobile parts of the Nvidia 'Maxwell' series.
      The VBIOS versions in this post are tweaked for performance and versatility. You'll get almost complete control over the performance parameters of your GPU.
      List of available VBIOS mods:
       
      Nvidia GTX 970m - 'OC edition' rev0 - >> 6 GB Version << - modified by @johnksss & svl7 -> see attachments Nvidia GTX 980m - 'OC edition' rev0 - >> 8 GB Version << - modified by @johnksss & svl7 -> see attachments  
      Screenshot demonstrating the capabilities of the 970m versions:

      >> Read the instructions carefully before flashing! <<
      If anything is unclear after reading or if you have additional remarks, please post in the thread.
       
      Flashing:
       
      - Go to the device manager -> 'Display Adapters' -> chooser your GPU, right click on it and choose disable
      - Flash the VBIOS with mnvflash, a modified version of nvflash (see attachments). Here are detailed instructions for nvflash in case you aren't familiar with it.
      - After the flashing is done: Enable the GPU once again in the device manager.
      - Reboot
       
      Do NOT use driver 347.09, it's broken and useless and won't allow you to overclock, even with the stock firmware.
      Don't distribute the files hosted here outside of Tech|Inferno. Don't modify the files you download here.
       
      Donation link in case you want to buy me a beer

      Thanks and cheers!
    • By Binarious
      I installed an NVIDIA Quadro P4000 Max-Q in a Clevo P750DM-G.
       
      Device manager hardware ID shows:
      PCI\VEN_10DE&DEV_1BB7&SUBSYS_75021558&REV_A1
       
      I have done the standard inf file mod, then disabled driver enforcement as I have done successfully in the past, but it's not working this time. The install starts, then fails less than half way through. I have tried the DCH version, standard version, and studio versions and none of them will work. I am probably missing something. Could it be the result of the vBIOS?
       
      Below are screenshots starting with GPUz
       

       
       
       

       
       

       
       
       
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.