Jump to content
EwinRacing Flash Series Gaming Chairs
Sign in to follow this  
sslmm

Low performance with low GPU usage 980m

Recommended Posts

Hi there.

I've been noticing performance drops on some games associated with low GPU usage. The games run fine at 60 fps + for the most part and the gpu usage is above 80%. But in some areas the fps drops dramatically to mid 30fps and the gpu usage drops to 30-40% too. Even on Borderlands Pre-sequel, where the game usually runs at 120-90 fps, sometimes drops to 40-35 fps (with physx on low setting wich i think is the same as OFF).
My CPU usage never hit 99% or near that on that sections so i hope it isn't the CPU bootlecking.
And it isn't Temperature Throttle, because the temps are about 70º on those moments (my gpu only gets really hot when its usage get's above de 90%).


Other thing i noticed was that with the latest nvidia drivers that i got to work (376.33), when i turned physx to higger settings, the performance got a drop but it didn't show any physx effects anywhere on the game. Another thing that doesn't work is the Nvidia Gamestream because it always gives error trying to connect from another device.

 

Performance wise, it looks like i'm getting the same performance as my girfriends clevo P651SE that has an 970m, and on that laptop, i can connect to nvidia gamestream using the same method that fails on my laptop.

 

Could the reason be the new drivers? It is getting more dificult to install new drivers on this model and i can see that some functionalities are starting to fail. 
By the way, i don't overclock any of my components.

 


My System Specs are :

- Clevo P150EM with PremaBios V2 and PremaVbios V2 Flashed

- nvidia 980M
- I7-3820QM

- 16gb of RAM

- Windows 7 64Bits

- 180W powersupply with 1 year of use ( I bought a new one from a CLEVO P651SE because it was smaller than my stock one, and my original was starting to fail, just outputting 130W from the 180W, making my internal display dimm the Light when i pushed my 980m just a little bit more)


Thanks in advance

Share this post


Link to post
Share on other sites

BUMP

So, almost one month and nobody knows anything about this problem?
Thanks

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By Qvixot
      Hello everyone! First of all sorry if this isn't the correct forum to post this.
      I bought a laptop few days ago. The laptop is Sager P150EM.
      Cpu:i7 3610qm 
      Gpu: amd hd 7970m
      Ram: 8gb
      Os: windows 8.1 pro
      So my problem is that everytime i install the amd driver after the intel driver my laptop freezes or gets a bsod or something that stops it from working. Any help would be appreciated. I saw somewhere something about vbios does this matter anywhere?
    • By Dr_Cachetes
      Hello everyone, it is 2020 and i've been looking literally EVERYWHERE for a modded vBios for an Asus G751jy (980m 4gb) to unlock voltage control above 25mV, can someone help me?
      I've seen people have been linking the mod so here's mine, latest 213
      GM204.rom
    • By BasedKnight
      I recently purchased a replacement 980M (Clevo model) for my P770DM-G after the original died, however, after installing the card the laptop doesn't boot. I only get a black screen, and after a couple minutes the fans spin to max before shutting down, which is the same thing that happens when I try to boot it without any gpu at all. I've tried the reset procedure, unplugging, removing battery, and removing CMOS, to no avail. It does beep before shutting down (I counted 22 times exactly). Anyone have any insight as to what the problem is?
    • By duffman_777
      Managed to find a relatively cheap MSI 1070 on ebay, and after reading a few success stories that 1070's are compatible I decided to pull the trigger. 
       
      Modified the bottom case as per the photo on this FAQ page http://www.eurocom.com/ec/faqs(272)ClevoP150EM_SagerNP9150_XMG_P502_PRO. Things were going well until I went to screw the card down and felt some resistance.
       
      Oops. Looks like that capacitor(?) with the blue on it *just* clashes with the card. Now what's weird is not all P150em motherboards seem to have this component on it - looking at replacements this component is not there. Also looking at the photos from this 1080m P150em mod (https://premamod.wordpress.com/2017/10/10/clevo-pascal-mxm-standard/), this component isn't there either. Does anyone know what this is, and if it can be removed? Or, if this could be taken off and shifted out of the way somehow, or replaced with a smaller equivalent...?
       
      In my disbelief/annoyance/problem solving when trying to push it down, I did notice that the card has a surprising amount of flex in it and it *can* be screwed down almost completely to a level where I feel somewhat comfortable in doing... Though I'd rather not put this strain on the card if there is a way to avoid it.
       
       
       
       
       



    • By Edrc
      Hello,
       
      I am new on this forum, so I am sorry if posting at the wrong place. It's been 2 weeks that I am searching how to make my GTX 980M 8GB working Inside my Alienware 17 R1 (June 2014, i7 4710MQ, 60 Herts Display, OPTIMUS and the GTX 880M Inside died.)
      After "quickly" looking some forums, I saw that a 980M would easily fit Inside … but maybe I was wrong.
       
      Hardware wasn't a problem. I've also could install drivers by modding the nvdmi or nvcvi. inf files. The card was recognied BUT :
      the clock speed is locked a 135 or 405 Mherts and fan is not runing when booted up.
      I tried to flash vBios with nvflash and some ROM I found on vBios collection … but no way to get this working properly.
       
      So, i'm coming here. I've seen many people talking about Prema or svl7 or other big boss in the place … but ? how ? where ? when ?
       
      Inside the peripherial manager I have this in remote acces path : PCI\VEN_10DE&DEV_1617&SUBSYS_05AA1028&REV_A1\4&D590A51&0&0008
      So I assume my GTX 980M card ID is 1617 and vendor and PC Model are 05AA 1028.
      But near the "Standard Microsoft Video Card" there is a yellow exclamation point and Inside details it says "this peripherial doesn't work properly" when no Nvidia drivers installed.
      I could find some vBios with 1617 (Asus) but black screen at boot up. Since laptop model where not the same .. probably.
      And I wasn't able to find 1617 with the existing 05AA 1028 … as the GTX 980M was not an option for my model. (AW 17 R1 2014 ,60Herts)
      I tried 353.60, 382.33 and 419.35 drivers. The latest one seems easier to install but longer.
       
      BIOS is A16 from Dell. And I am using Windows 10. Got a Dell 330W brick. 
       
      I saw a guy with the exact model as me, he gets a modded vBios especially for his configuration, then everything worked easily … but can't find the topic again
       
      I guess depending on the card info and the laptop model … a dedicated vBios is required … 
       
      So, If anyone here got some informations or any kind of help for me, it would be very nice.
       
      Thanks for reading and help.  
       
      PS: there are a lot of files, pictures and links that I can't see on this forum .. even after registration …. 
       
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.