weird boot after p150hm upgrade gtx485m to k3000m

[kaxen]

I upgraded the mxm graphics card in my clevo p150hm from gtx 485m to dell k3000m.

 

After the upgrade the booting behavior of the notebook was strange..

The bios screen does not complete when detecting hardware 

It shows the AMI logo and one line of text "AMIBIOS © 2010 American Megatrends, Inc." 

It does nothing for 30 seconds, then beeps once. 

Again it does nothing for 30 seconds then beeps once. 

And again it does nothing for 30 seconds then beeps once. 

Then it shows a flashing white cursor at top left of black screen for about 3 seconds. 

The cursor then drops down a few lines then Windows begins to boot. 

Please help me to solve it.

i tried both k3000m at svl7 vbios page also the same problem.

[jaybee83]

so in the end windows actually boots properly and ure able to use the gpu?

Sent from my Nexus 5 using Tapatalk

if thats the case, consider urself lucky, since dell cards are known NOT to work in clevo machines

[kaxen]

On 26/12/2015 at 3:09 AM, jaybee83 said:

 

so in the end windows actually boots properly and ure able to use the gpu?

Sent from my Nexus 5 using Tapatalk

if thats the case, consider urself lucky, since dell cards are known NOT to work in clevo machines

yes. able to boot window. i saw on other topic it need a proper vbios. too bad prema not here to help mod the vbios.