tone007 Posted May 29, 2014 Share Posted May 29, 2014 Hi,I have both an M14xR1 and an AW14 here, and when I plug my M14x into the TV the audio "just works" over HDMI to the TV, not so with the AW14. Video is fine, but audio just comes out of the internal speakers. I'm probably overlooking a simple setting somewhere, any ideas?Thanks. Quote Link to comment Share on other sites More sharing options...
Moderator angerthosenear Posted May 29, 2014 Moderator Share Posted May 29, 2014 Have you installed the latest Nvidia drivers? The driver for the audio is tied in with it (pretty sure). Check you audio devices in device manager and see if there is anything in there. This is my desktop, but iirc it's the same on the AW. I don't have the AW14, and sold off my m14xR2 soooooo pretty much on you to figure out sadly (or wait for another member to help ya out: Hopefully that at least gets you started. If that doesn't work try checking in the Sound - Playback devices and see if the HDMI stuff shows up there. You could try setting those as default once it's all plugged in to see if it'll force it's way to route audio out. You'll have to restart the program if you change devices or else it'll persist on the one output (your speakers). Good luck @@! 1 Quote Link to comment Share on other sites More sharing options...
TheOneAndOnlyOrchestra Posted June 1, 2014 Share Posted June 1, 2014 Well for my Situation . I usually get the Audio pop when I plugged in the HDMI and I chose the whatever is the output of my HDMI which in my case was my TV . Did you get some audio pop ?I also agreed with angerthosenear therePropabably want to check your Playback settings and set you TV to default to make it work . Quote Link to comment Share on other sites More sharing options...
conduit Posted November 9, 2014 Share Posted November 9, 2014 It will also be coming out of the headphone jack if you have a different speaker setup, ie speakers Quote Link to comment Share on other sites More sharing options...
duncan999007 Posted December 3, 2014 Share Posted December 3, 2014 Drivers and set the HDMI output as default. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.