drill3r Posted April 2, 2014 Share Posted April 2, 2014 i posted this over at the NBR forums and in the process of trying to get things worked out i found this site through google and through suggestions on NBR.anyway, my question is this - has anyone had problems with clevo 765m cards in a m18x r1? specifically when installed i get a powered on screen, but it is blank/black. i can't see the raid POST screen, the bios splash screen, or anything after that. no beeps or anything. when i have the 460m in the primary slot and a 765m in the secondary slot i can see that the modded inf drivers have been installed correctly and geforce experience recognizes the 765m in the secondary slot.mr. fox suggested flashing the cards with the 765m dell vbios. i think that's a good idea and what i'm going to do next unless someone says, "Don't do it!!!"any other suggestions? Quote Link to comment Share on other sites More sharing options...
Tulius Posted May 22, 2014 Share Posted May 22, 2014 Open laptop, pull out GPU and remove battery(pull out battery cable), insert battery again before inserting GPU and pull back GPU again. See if it works. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.