Jump to content
EwinRacing Flash Series Gaming Chairs
Sign in to follow this  

Recommended Posts

Hi All, We can Unlock the last bios and vbios for ovc the gtx950m of Asus N552VX ? would  nice!

 

Specification Notebook

Backup bios with afuwinx64

 

Thanks in Advance :)

 

If i try to get a backup  bios of gtx950M i get this error:

(c) 2017 Microsoft Corporation. Tutti i diritti sono riservati.

C:\WINDOWS\system32>cd C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64

C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>nvflash -b backupbios.rom

NVIDIA Firmware Update Utility (Version 5.287.0)
Modified Version By Joe Dirt

Adapter: GeForce GTX 950M     (10DE,139A,1043,1C9D) H:--:NRM S:00,B:01,D:00,F:00


WARNING: Debug port will be disabled during EEPROM access.

The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.

 Command failed to complete mailbox0 = FFFFFFFF
Command id:000A Command: NV_UCODE_CMD_COMMAND_PREP failed
Command Status:NV_UCODE_CMD_STS_NONE
Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT
Identifying EEPROM...
 Command failed to complete mailbox0 = FFFFFFFF
Command id:0002 Command: NV_UCODE_CMD_COMMAND_EID failed
Command Status:NV_UCODE_CMD_STS_NONE
Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT

ERROR: Error: Display adapter's EEPROM ID process failed

C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>

 

Edited by Steppdroid

Share this post


Link to post
Share on other sites
23 hours ago, Steppdroid said:

Hi All, We can Unlock the last bios and vbios for ovc the gtx950m of Asus N552VX ? would  nice!

 

Specification Notebook

Backup bios with afuwinx64

 

Thanks in Advance :)

 

If i try to get a backup  bios of gtx950M i get this error:

(c) 2017 Microsoft Corporation. Tutti i diritti sono riservati.

C:\WINDOWS\system32>cd C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64

C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>nvflash -b backupbios.rom

NVIDIA Firmware Update Utility (Version 5.287.0)
Modified Version By Joe Dirt

Adapter: GeForce GTX 950M     (10DE,139A,1043,1C9D) H:--:NRM S:00,B:01,D:00,F:00


WARNING: Debug port will be disabled during EEPROM access.

The display may go *BLANK* on and off for up to 10 seconds during access to the EEPROM depending on your display adapter and output device.

 Command failed to complete mailbox0 = FFFFFFFF
Command id:000A Command: NV_UCODE_CMD_COMMAND_PREP failed
Command Status:NV_UCODE_CMD_STS_NONE
Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT
Identifying EEPROM...
 Command failed to complete mailbox0 = FFFFFFFF
Command id:0002 Command: NV_UCODE_CMD_COMMAND_EID failed
Command Status:NV_UCODE_CMD_STS_NONE
Error: NV_UCODE_ERR_CODE_CMD_TIMEOUT

ERROR: Error: Display adapter's EEPROM ID process failed

C:\Users\Stefano\Desktop\NVFlash_Certs_Bypassed_v5.287_x64>

 

Hi!
Send me your file backup of bios. I'll look at it.

For creating backup of bios you can use attached program. Unzip attached archive directly on the Desktop and run the program as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Send me this archive "results" via PM.
http://www11.zippyshare.com/v/ul5knVKr/file.html

  • Thumbs Up 1

Share this post


Link to post
Share on other sites
On 24/4/2017 at 9:29 AM, Klem said:

Hi!
Send me your file backup of bios. I'll look at it.

For creating backup of bios you can use attached program. Unzip attached archive directly on the Desktop and run the program as Administrator (right click mouse). Program will create archive "results" directly on the Desktop. Send me this archive "results" via PM.
http://www11.zippyshare.com/v/ul5knVKr/file.html

Hi, Thanks!! I send you a PM

Edited by Steppdroid

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Content

    • By jm28
      Hello! There can someone unlock me Lenovo Yoga 2 bios 113 be for me to be able to access the hidden option Yoga 2 13 bios? I am willing to donate a coffee or two.
    • By Onehit
      I've been scouring the internet in search of anything regarding an updated bios for my Clevo P170SM. I have found many mentions of Prema Bios mods on various websites, but good luck trying to find actual download links. They all seem to vanish or have dead links. Wayback Machine doesn't help either and I was only able to find stock Clevo bios as early as 2015 via the WayBack Machine. If anybody has an updates Prema Bios or some other unlocked bios file for the P170SM, that would be fantastic! Otherwise, I might have to consider paying over $100 to Eurocom for their unlocked bios.
    • By Henrik9979
      Okay here is what's going. I have a alienware m18x r1 running an amd 8970m, I wanted to upgrade it to crossfire but I could see a 8970m was more expensive than a r9 m290x
      So I decided to buy a r9 m290x and see if I could make it work in my alienware and also run crossfire.
      Even though many shops refused to sell me one because the didn't think it would work in an alienware m18x r1 only in the r2.
       
      Here is the whole process.
       
      19/08/17 23:15
      No post bios showing when booting, so impossible to enter bios menu, but can boot into windows 10 with no problems.
       
      19/08/17 23:20
      Because I haven't deleted the old AMD 8970m the r9 m290x shows as a 8970m with no problems.
       
      19/08/17 23:34
      First performance test was a success. The r9 m290x changed p-state normally. The gpu fan start spinning normally. But because of no thermal paste, the test lasted 20 seconds because the temperature raised fast.
       
      20/08/17 00:00
      Created a backup of the vbios version
      015.032.000.004.044450
       
      20/08/17 00:10
      Flashed a new clevo vbios version 015.032.000.003.044465
      Caused the card to be corrupted and resulted the 8 beep code.
       
      20/08/17 00:35
      Finally managed to flash the back and return the graphics card to its original state.

      20/08/17 00:50
      Flashed a new dell vbios version 015.046.000.014.045579
      No change in behavior
       
      20/08/17 01:07
      After trying multiple vbios with no luck I finally found one.
      Dell vbios Version 015.041.000.000.044966
      Brings back the post bios screen and I can now enter the bios menu through the r9 m290x.
      Note: This vbios reduce the cards performance from 900 mhz to 850 mhz
       
      20/08/17 01:21
      After more testing I found one that is working with no limits.
      Clevo vbios version
      015.036.000.005.044618
      Brings back the post bios screen and I can now enter the bios menu through the r9 m290x.
      This will be the vbios I will keep at the moment.

      20/08/17 01:56
      I completely uninstalled the previous driver and installed the newest driver. The graphics card is recognized as a 8970m but works normal.

      21/08/17 20:15
      I have inserted my old 8970m in the secondary slot and will start testing crossfire.
       
      21/08/17 21:45
      I have found out that the fan for the secondary fan did not spin. The is a cable that have felt out. I will fix it now.

      21/08/17 22:00
      In my try to test crossfire compatibility, I installed the newest AMD driver 17.7.2 but as soon it installed the driver for the secondary card it caused black screen. Only booting the computer in safe mode brings the screen back.

      21/08/17 23:02
      After many frustrating hours I finally managed to get crossfire working with the r9 m290x as the primary card and my old 8970m as the secondary.
      I have flashed the same vbios on both cards so the r9 m290x shows up I device manager as a 8970m.
       
      I first installed AMD driver version 16.2.1
       
      Then installed AMD driver version 16.6.1 in order to play battlefield

      21/08/17 23:20
      First test run in battlefield 1

      21/08/17 23:40
      Battlefield 1 is flickering bad, this can maybe be solved with a new patch or driver.
      Other games I have tried is working perfect with crossfire on.


      Now what I would like to try is somehow force the r9 m290x driver to be installed and see if it will make it possible to run the latest AMD driver without getting a blackscreen.
       
      I have tried to edit the .inf file like you would do with nvidia but no luck.
      I have also tried to figure out how to edit the device id in the vbios, but I find it too complex.
    • By fra
      hi, could someone help me showing the advanced option in the bios of the dell inspiron 3501? because i need to change the ram speed which are actually bios locked and increasing the power limit. thanks in advance. 
    • By rsk
      Hello everyone I'm new on this forum and i'm new with clevo laptop. 
      I've recently buy a second hand laptop a clevo p751dm2-g with a i7 6700k and a 1070 mxm and unfortunatly the bios is locked i can't overclock my cpu or my ram. :sadge: 
      So i wanted to know if you guys on this forum have alternative solution to oc your cpu and your ram with a locked bios. 
      Thanks 
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use. We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.