aldam Posted November 29, 2011 Share Posted November 29, 2011 Hi,I've go a problem with OCing my xfire setup. I tried Trixx to oc the cards.I tried but with no success. I couldn't find any options to up the voltage (it is inactive).On the standard voltage it gains only 20mhz more on the core. Maybe I do sth wrong. It's my first CF setup.Bios A10, dell vbios.aldam Link to comment Share on other sites More sharing options...
Adam Noble Posted November 29, 2011 Share Posted November 29, 2011 Did you prepare you machine before you started using TRIXX? i think you needed to do a few tweaks before TRIXX settings would work but i may be wrong as my OC also dont work but i am on 4870's so that could be the reason. Link to comment Share on other sites More sharing options...
mw86 Posted November 29, 2011 Share Posted November 29, 2011 select ulps disabled and restart the computer... in Trixx... then they should work maybe check synchronize cards too and also set start at windows start or the upls doesn't get applied in the registry that's all that should be needed. 1 Link to comment Share on other sites More sharing options...
aldam Posted November 30, 2011 Author Share Posted November 30, 2011 mw86 Thx I still have got an inactive voltage option. I've no idea how to increase the voltage on gpu Link to comment Share on other sites More sharing options...
mw86 Posted December 1, 2011 Share Posted December 1, 2011 mw86Thx [ATTACH=CONFIG]2866[/ATTACH] I still have got an inactive voltage option. I've no idea how to increase the voltage on gpu you are welcome. Trixx wont change the voltage for mobile cards... go here and brush up on the tutorial.. you need to change the 3d clock profile in your vbios from 1.05 to whatever you want ... 5870ms are nice i liked the ones i had... since you can go as high as 1.15v. See the link below. but before you flash the bios you edit them in RBE and save them and then place on the thumb drive as explained in the guide. http://forum.techinferno.com/alienware-m17x/51-ati-amd-5870m-vbios-flash.html see here to learn RBE vbios editor : Tutorial on how to use RBE (Radeon BIOS Editor) | techPowerUp 1 Link to comment Share on other sites More sharing options...
aldam Posted December 1, 2011 Author Share Posted December 1, 2011 Thx again.I had M6500 with 7820m (5870m). I remeber I could change the voltage in Trixx. But nevermind I've to try to edit the vbios.The max on stock v is 840/1240 and it gives me 4900 points in 3dmark11. Link to comment Share on other sites More sharing options...
Recommended Posts