Search the Community
Showing results for tags 'sata 3'.
Found 2 results
First off all Hello, I recently installed Sandisk Dashboard and Found out that my 256 gb Sandisk Ultra Plus is only using a 3 Gb/s connection instead of a 6 Gb/s connection. After that I installed Intel RST to get the latest AHCI driver but the connection changed to 1.5 GB/s instead of 6 Gb/s. Than I reinstalled Windows 10 with uefi Boot enabled just to try that out but it didn`t changed it either. I checked the Speed with AS SSD benchmark and got around 240 mb/s read and 220 mb/s write speeds with the standard windows AHCI driver and around 120 mb/s read and 110 mb/s write speeds with the latest available IRST drivers. So I wanted to know if anybody can help me to get the full 6 GB/s connection that should be possible with SATA 3. I also tryed reflashing the bios. PC specs: Clevo P150SM with I7 4700qm GTX 780m 8GB RAm 256 Gb Sandisk Ultra Plus in SATA Port 0 & 500gb HGST SATA 3 drive in SATA Port 5 Latest drivers installed exept IRST because it slows the PC down Latest Bios flashed
Hi, I am on the verge to buy an M18x but I plan to replace the HD with an Crucial 300 SSD. Since this model is targeting a SATA 3.0 bus (and giving its full power only on that connection), would some owner of an M18x be so kind to check if the motherboard is SATA 2.0 or SATA 3.0 ? I could not find any precision on the web regarding the motherboard equipment. Many thanks in advance !