Search the Community
Showing results for tags 'vcore'.
-
As I recently shared, I've upgraded my m17x R4 with a 3920xm ES CPU I bought on eBay - and I've been tweaking it a lot in the past days. I have my multipliers set at 44x1, 43x2, 42x3, and 41x4 cores. This appears to be as high as I can go without significant instability. The current settings ARE stable as long as the notebook is on a good hard surface (I also added bigger feet to the back to aid in air intake) but I'm noticing WHEA error 19's in my event log. These are processor parity check errors, basically saying it went back and checked its work and found that it got a different result the second time, forcing it to redo the calculation. This signifies that I'm on the edge of instability, and a google search indicated that the usual solution was to bump the CPU voltage up a *tiny* bit - However it appears that I cannot exceed my current 1.331v max (via HwInfo64 monitoring.) I can set the value higher in Intel Extreme Tuning platform and it appears to take the value (it even shows the increase in BIOS upon reboot) but going higher than +105mv (corresponds to 27 "additional turbo voltage" in BIOS) stops yielding higher max voltages in HwInfo64 - and appears to have no effect on CPU stability. When I look at Intel XTU / ThrottleStop screenshots of this same CPU being used in m18x's, I see vcore voltages of ~1.5v being achieved - enabling notably higher multipliers, but after lots of tinkering I'm unable to exceed 1.331v on my system. Is this a hardware limit of the M17x R4's mobo? A firmware/BIOS limit? Any suggestions for bypassing it? Other posts indicate that if I could even ramp up my voltage by something like +.05v, that could be enough to stop the parity check warnings without requiring me to reduce my speed - and I'll admit I'd sure love to see the 46x4 multi's that are being achieved at 1.5v... someday... with an overclocker's warranty from Intel.